Troubleshooting; Flowcharts - Whirlpool 8178501A Manual

Fast fill dispenser system
Table of Contents

Advertisement

TROUBLESHOOTING

Flowcharts

The flowcharts on the following pages are intended to be used with the Diagnostics Charts. If a
problem occurs during the diagnostics tests, refer to the flowcharts to help locate and correct it.
The flowcharts cover the following problems:
1. Ice Cannot Be Dispensed (Water Dispenser Is Operating Normally) - Page 5-6.
2. Both Ice And Water Cannot Be Dispensed - Page 5-7.
3. Ice Maker Does Not Produce Ice (Water Dispenser Is Operating Normally) - Page 5-8.
4. Ice Maker Does Not Produce Enough Ice - Page 5-8.
5. Water Cannot Be Dispensed (Ice Maker Is Operating Normally) - Page 5-9.
6. Measured Fill Is Not Accurate - Page 5-10.
7. Water Dispenser Fill Is Too Slow - Page 5-10.
8. Dispenser Lighting Does Not Operate - Page 5-11.
9. Dispenser Lighting Does Not Operate Correctly In The "Auto" Mode - Page 5-11.
10. Dispenser Lighting Does Not Turn Off - Page 5-11.
11. User Interface Keypad Buttons Do Not Operate Correctly - Page 5-12.
12. User Interface Display Indicators Do Not Operate Correctly - Page 5-12.
13. Moisture Present In Dispenser Area - Page 5-13.
5-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

R-101

Table of Contents