Canon imagePROGRAF iPF6300S User Manual page 151

5.
A
In the Media Type list, select the type of paper that is loaded.
6.
After confirming that
7.
Click the Page Setup tab to display the Page Setup sheet.
8.
O
Click Size Options to display the Paper Size Options dialog box.
9.
Enter a desired paper name in Custom Paper Size Name. 430 mm Square is used in this example.
10.
Select mm in Units.
11.
Enter 430 (16.9 in) in both Width and Height.
Note
• If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either
Width or Height, the other value will be automatically applied based on the original aspect ratio.
12.
Click Add to register 430 mm Square.
13.
Click OK to close the Paper Size Options dialog box.
14.
Click Cut Sheet in the
15.
A
In the Page Size list, click the size you added,430 mm Square.
iPF6300S
Enhanced Printing Options
D
Easy Settings is selected, select from the
L
Paper Source list.
> Printing banners or at other non-standard sizes
E
Print Target list.
Printing on Non-Standard Paper Sizes (Windows)
>
2
133