Canon imagePROGRAF iPF6300S User Manual page 941

System
Reset PaprSetngs
Setup
Erase High Speed
HDD
Data
Secure High Spd.
Secure
Output Print
Meth-
Print (Auto Del)
od
Save: Box XX
Print After Recv
Common Box Set.
Show Job Log
Prep.MovePrinter
Admin. Change Password
Menu
iPF6300S
Setting Item
Control Panel
Description, Instructions
Restores settings that you have changed with Media
Configuration Tool to the default values.
Erases file management data for print job data stored
on the printer's hard disk. (See "Erasing Data on the
Printer's Hard Disk.")
→P.886
Overwrites the entire hard disk with random data.
(See "Erasing Data on the Printer's Hard Disk.")
→P.886
Overwrites the entire hard disk with 00, FF, and ran-
dom data (one time each). Verification is performed to
check if the data was correctly written. (See "Erasing
Data on the Printer's Hard Disk.")
Select the printing method for jobs received from soft-
ware other than the printer driver. When using the
printer driver, configure settings on the printer.
To print as usual, select Print. Selecting Print (Auto
Del) will print the job and then delete the data from
the printer's hard disk. Selecting Save: Box 01 will
only save the print job in the box, without printing it.
A setting for jobs received from software other than
the printer driver. When using the printer driver, con-
figure settings on the printer. Select On to print the
job after it has been saved.
Select Print (Auto Del) to print without saving jobs
in the box shared among multiple users.
Selecting Off prevents display of the log in Job
Menu > Job Log. Additionally, the log is not printed
if you choose Job Menu > Print Job Log. Note that
because job logs are not collected, the Status Monitor
accounting functions will not work correctly.
When transferring the printer to another location,
choose the level of transfer and follow the instructions
on the screen. (See "Preparing to Transfer the Print-
er.")
→P.1003
Not displayed during a warning message that the re-
maining Maintenance Cartridge capacity is low.
By setting a password, you can restrict menu display
and configuration as follows. Enter a number in the
range 0–9999999.
• Viewing and configuration by administrators
only
IPv4 Settings
Change Password
Init.Admin.Pswd
• Viewing and configuration
administrators, and only viewing by other
users
Interface Setup settings (except IPv4 Settings )
Date & Time
> Printer Menu >
→P.886
923
by
Menu Settings
9