Setup Examples - Zoom Studio 1202 Operation Manual

1. Connection between instrument and playback system
This example demonstrates the use of the 1202 as an instrument effecter. For a monaural setup, use only the left (L)
connector. The MIX control should normally be set to the center position.
distortion processor, or similar
2. Connection in send/return loop of a mixer
This type of connection allows use of the 1202 for any instrument or sound source connected to the mixer. The MIX control
should normally be turned fully clockwise.
SEND 1
3. Successive use of two effect types
When a compound effect (indicated by a / in the effect name) is selected, two types of effects can be used in series, as shown
in this example. It is also possible to insert an external effecter between the first and second effect.
4. Parallel use of two effect types
When a compound effect (indicated by a / in the effect name) is selected, two types of effects can be used separately, as
shown in this example.
ZOOM CORPORATION
2-10-2 Miyanishicho Fuchu-shi, Tokyo 183 Japan
Tel: (0423) 69-7111. Fax: (0423) 69-7115.

Setup Examples

Preamplifier,
1202
SEND 2 SEND 3
1202
1202
INPUT
Preamplifier,
L/MONO
distortion processor, or similar
Preamplifier,
distortion processor, or similar
INPUT OUTPUT
L/MONO R L R
1202
RETURN 1
R L R
L/MONO
OUTPUT
INPUT
RETURN 2
R L R
L/MONO
INPUT OUTPUT
RETURN 3
R L R
L/MONO
OUTPUT
INPUT
Delay
OUTPUT
R
R L
1202
INPUT OUTPUT
Keyboard Amp
L/MONO R L R
1202
Amp Amp
Amp
Guitar Amp
Printed in Japan 1202-5000