Selecting The Projection Quality (Selecting Color Mode) - Epson EB-1776W User Manual

Adjusting Projected Images
• Adjust the volume from the Configuration menu.
Settings - Volume p.82
s
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume
before powering off, so that you can power on and then gradually increase the
volume.
Selecting the Projection Quality (Selecting Color
Mode)
You can easily obtain the optimum image quality simply by selecting the
setting that best corresponds to your surroundings when projecting. The
brightness of the image varies depending on the mode selected.
Mode
Ideal for use in a bright room. This is the brightest
Dynamic
mode, and reproduces shadow tones well.
Presentation Ideal for making presentations using color materials
in a bright room.
Ideal for watching films in a dark room. Gives
Theatre
images a natural tone.
*1 Ideal for projecting still pictures, such as photos, in
Photo
a bright room. The images are vivid and brought
into contrast.
*2 Ideal for watching TV programmes in a bright
Sports
room. The images are vivid and brought to life.
Ideal for images that conform to the sRGB
sRGB
standard.
Application
g
color
Mode
Blackboard Even if you are projecting onto a blackboard
(greenboard), this setting gives your images a
natural tint, just like when projecting onto a screen.
Ideal for making presentations using a whiteboard.
Whiteboard
Select Customized if you want to adjust the R, G,
Customized
B, C, M, and Y settings in the Color Adjustment
submenu of the Configuration menu.
*1*3 Ideal for projecting X-ray photographs and other
DICOM SIM
medical images. This produces images with clear
shadows. The projector is not a medical device and
cannot be used for medical diagnosis.
*1 This selection is only available when the input signal is RGB or when the
source is USB Display, USB, or LAN. (Depending on the model used, some
sources are not supported.)
*2 This selection is only available when the input signal is component video, or
when the source is Video.
*3 The effects may not be reproduced correctly according to your settings and
screen specifications.
Each time you press the [Color Mode] button, the Color Mode name is
displayed on the screen and the Color Mode changes.
Remote control
43
Application