Switching To The Target Image By Remote Control; Projecting With Usb Display; System Requirements - Epson EB-1776W User Manual

Projecting Images

Switching to the Target Image by Remote Control

You can change directly to the target image by pressing the following
buttons on the remote control.
A
Changes to images from the Computer port.
B
Each time the button is pressed, it cycles through the images being input
from the following sources.
• Video port
• HDMI port
C
Each time the button is pressed, it cycles through the following images:
• USB Display
• Images from the device connected to the USB (TypeA) port
D
Switches to the image from the network connected device. (EB-1776W/
EB-1771W/EB-1761W only)
Remote control

Projecting with USB Display

You can use the supplied USB cable to connect the projector to a computer
to project images from the computer.
You can project images and send audio with one USB cable.
To start USB Display, set USB Type B to USB Display from the
Configuration menu.
Extended - USB Type B
s

System requirements

For Windows
Windows 2000
OS
Windows XP
Windows Vista
Windows 7
Mobile Pentium III 1.2 GHz or faster
CPU
Recommended: Pentium M 1.6 GHz or faster
p.84
*1
Professional 32 bit
Home Edition 32 bit
Tablet PC Edition 32 bit
Ultimate 32 bit
Enterprise 32 bit
Business 32 bit
Home Premium 32 bit
Home Basic 32 bit
Ultimate 32/64 bit
Enterprise 32/64 bit
Professional 32/64 bit
Home Premium 32/64 bit
Home Basic 32 bit
Starter 32 bit
31