Moving Images Are Not Displayed; Projection Stops Automatically; The Message Not Supported Is Displayed; The Message No Signal Is Displayed - Epson EB-1776W User Manual

Problem Solving

Moving images are not displayed

Check
Is the computer's image signal being output to the LCD and the
monitor?
(Only when projecting images from a laptop computer or a
computer with a built-in LCD screen)
Are the contents of the moving image you are trying to project
copyright protected?

Projection stops automatically

Check
Is Sleep Mode set to On?
The message "Not supported" is displayed
Check
Is the image signal format setting correct?
(Only when projecting images from a video source)
Do the image signal resolution and the refresh rate correspond to the
mode?
(Only when projecting computer images)
The message "No Signal" is displayed
Check
Are the cables connected correctly?
Change the image signal from the computer to external output only. Check your computer's documentation, or contact
the computer's manufacturer.
The projector may not be able to project copyright protected moving images that are being played back on a computer.
For more details, see the user's guide supplied with the player.
Press the [t] button to turn the power on. If you do not want to use Sleep Mode, change the setting to Off.
s Extended - Operation - Sleep Mode
Change the setting according to the signal for the connected equipment.
s Signal - Video Signal p.81
Refer to the computer's documentation for how to change the image signal resolution and the refresh rate output from
the computer.
s "Supported Monitor Displays" p.133
Check that all the cables required for projection are securely connected.
s "From Installation to Projection" p.29
Remedy
Remedy
p.84
Remedy
Remedy
103