Battery Charging - Sterling SAPPHIRE 2 Owner's Manual

4 wheel scooter
Hide thumbs Also See for SAPPHIRE 2:
Table of Contents

Advertisement

Assembly
provided.
the front of the tiller.
located at the rear of Battery "A".
scooter.
Lift the seat onto the seat post and press down to ensure it is fully engaged.

Battery Charging

the scooter unless the battery has been fully charged as failure to do this will result in
battery damage.
the left hand side of the tiller fascia panel. Switch on the mains supply and then switch
on the battery charger. RED light = Power On, YELLOW Light = Charging and GREEN
Light = Charge Complete. Charge the scooter overnight after each use to maintain
If you are in any doubt then please turn to pages 12 and 13 of this manual.
Typical Use
Designed for use on footpaths, for crossing roads and shopping. It should not be
driven through mud, water, snow, sand, loose gravel, long grass or any other unsound
surfaces.
3
Iss 1

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SAPPHIRE 2 and is the answer not in the manual?

Questions and answers

Fred miller
March 15, 2025

Drive wheels not working when I took the drive wheels from the body wheels rotate in different directions

1 comments:
Mr. Anderson
March 15, 2025

The drive wheels on the Sterling SAPPHIRE 2 may not be working while the body wheels rotate in different directions due to the scooter being in freewheel mode. When in freewheel mode, the motor is disengaged, allowing the wheels to spin freely without driving the scooter. To resolve this, check the freewheel lever and ensure it is in the "drive" position.

This answer is automatically generated

Table of Contents

Save PDF