Performing Live Streaming; Setting Distribution; Starting Distribution - JVC GY-HM650U Instructions Manual

Performing Live
Streaming
By combining with the set top box decoder or PC
application that supports live streaming, you can
perform audio and video streaming via the network.
Supported Formats
Video
1920x1080 / 60i (H), 60i (L)
0
1280x720 / 30p (H), 25p (L)
0
720x480/60i (U model)
0
720x576/50i (E model)
Audio
AAC
Supported Protocols
Network protocols
Transport mode

Setting Distribution

1 Set the [Record Format] according to the
resolution and frame rate of the video to be
distributed.
1920x1080 1280x720 780x480
60i, 30p
1920x1080
50i, 25p
60i
1440x1080
50i
60p, 30p
1280x720
50p, 25p
780x480 60i
.
Memo :
Live streaming cannot be performed in the
0
following cases.
When a setting other than "HD" is selected for
0
[Main Menu] B [System] B [Record Set] B
[Record Format] B [System]
When [Main Menu] B [System] B [Record
0
Set] B [Record Format] B [WFrame & Bit
Rate] is set to "24p"
166
: TCP, UDP
: MPEG2-TS
Settable Resolution during
Streaming/No. of Frames
60i 30p 60i
50i 25p 50i
60i 30p 60i
50i 25p 50i
60i 30p 60i
50i 25p 50i
60i 30p 60i
2 Set the Resolution and Frame & Bit Rate for
the video to be distributed.
Specify the settings in [Main Menu] B
[System] B [Network] B [Settings] B [Live
Streaming Set].
(A P118 [ Live Streaming Set ] )
3 Set the distribution protocol.
Specify the settings in [Main Menu] B
[System] B [Network] B [Settings] B [Live
Streaming] B [Type].
(A P119 [ Type ] )
4 Set the IP address and port for the
destination of distribution.
Specify the settings in [Main Menu] B
[System] B [Network] B [Settings] B [Live
Streaming] B [Destination Address]/
[Destination Port].
(A P119 [ Destination Address ] )
(A P119 [ Destination Port ] )

Starting Distribution

1 Perform the necessary setting for the set
top box decoder and PC application.
For details on the settings, please refer to the
instruction manual of the respective devices
and applications.
Memo :
If there is an NAT router within the
0
communication path between the camera and
the decoder, port forwarding setup is required.
For details on the settings, please refer to the
instruction manual of the router in use.
2 With the network connection established,
set [Live Streaming] to "On".
(A P143 [Preparing Network Connection] )
Set [Main Menu] B [System] B
0
[Network] B [Settings] B [Live Streaming
Set] B [Live Streaming] to "On".
The network connection mark appears on
0
the display screen when a network
connection is established.
282min
100min
50min
1920x1080
60 i HQ
4030 20 10 0
P 13000K
.
00: 00: 00.00
Jan 24, 2012
12 :34 :56
5 . 6f t
ND 1 /64
AE 6
+
0
dB
F1.6
1/ 100