Controlling Tv Usage - Mitsubishi Electric 151 Series Owner's Manual

18 TV Menus
Lock
Controlling TV Usage
This feature restricts the access according to the U.S.
based program ratings, the time of day or by the channels.
Restricting the access using the non-U.S. based ratings
(Alternate Rating System) can be setup from the 'Other'
submenu.
• To setup the restriction or to watch TV during the
restricted condition, a pass code is required.
• The pass code menu is displayed first whenever
Lock is selected on the main menu.
Setting a Pass Code
• Input four-digit pass code using the number keys
on the remote control.
• Press (CANCELlto delete a number and move back
one space.
• Press
8
or
§
to close the menu without setting
a pass code.
• Press (ENTER lto set the pass code.
• If you forget the pass code: press the number 9 and
LAST key on the remote at the same time.
Resetting a Pass Code
The old pass code is deleted when entering the Lock
menu, and prompts you to enter a new pass code.
Lock by Program Ratings:
• Restricts access to the TV using U.S.
ratings sent by the broadcasters.
• Lock applies only to ANT and compos-
ite jacks. Some signals do not contain
rating information and will not lock.
• To lock for 24 hours, set the same time
for Start Time and Stop Time.
Parental
lock TV Rating FV 0 l S V Movie Rating Start Time Stop Time
Ii
,... Off
j'TV-Y
j'
C
12,00 PM 12,00 PM
On j'TV-Y7
j' j'
PC
j' TV-C
j'
PC-13
~'TV-PC
j' j' j' j' j'
R
j
TV-14
II II II
II
II
NC-17
II TV-MA
II
II
II
II
X
j
Not rated
Lock by Time:
• Blocks all use of the TV during the specified time
period.
• Requires pass code to view during the locked
time.
Lock Control Panel:
• Disables the buttons on the TV's control panel.
• Press and hold ACTIVITY button from the panel for
about 10 seconds to unlock if the remote control
is not available.
Lock by Other Program Ratings:
• Restricts access using non-U.S. based ratings
sent by broadcasters.
• Grayed out if the Other rating is not detected in
the broadcasted signal.
Note: Other rating locks apply only to digital channels
and signals received on the ANT.