Setting Up The Ti700 - Timex Ti700 Quick Start Manual

Daylight-Saving Time
This unit is a preset Clock: the clock is already preset to Eastern Standard Time. It's simple to match settings to where you
live.
1. Set the DST Switch to +1. The DST icon will appear on top of display and the time will advance 1 hour.
2. Set the DST Switch to -1 to set the time back 1 hour.
Auto-Set Time and Date Settings
This model is equipped with an Auto-Set feature; the time and date have been set for Eastern Standard Time at the factory.
1. To change your time zone setting, press and hold the µ Time Zone Button. The current time zone will flash briefly at
the bottom of the display, then revert to the standard date display.
2. While the Time Zone is flashing, press the
the current time for the selected time zone. There are seven zones to choose from:
ATL Atlantic Standard Time
EAS Eastern Standard Time
CEN Central Standard Time
MTN Mountain Standard Time
PAC Pacific Standard Time
ALS Alaskan Standard Time
HAI Hawaiian Standard Time
Setting Time and Calendar
1. Press and hold the ¸ Clock Adjust Button located on the back of the unit for 2 seconds until the time display flashes.
If the time is correct, press the ¸ Clock Adjust Button again to accept the setting. Otherwise, press the
>> Button to adjust the time (hold for a few seconds to advance or reverse rapidly). Remember to set the correct AM or
PM time. (An icon at the upper right hand corner of the display is the PM Indicator; there is no AM indicator). When
the correct time is displayed, press the Clock Adjust button to confirm. The year display will flash.
2. Press the ¸ Clock Adjust Button to accept the current year setting or press the
year is displayed. Press the ¸ Clock Adjust Button to confirm year setting after adjustment.
3. The display will change to show the date flashing. Press the ¸ Clock Adjust Button to accept the current date setting
or press the << or
or reverse rapidly). Press the ¸ Clock Adjust Button to confirm the date setting after adjustment. You will hear 2
beeps indicating that clock and calendar setting is complete and it will exit the setting mode.

Setting Up the Ti700

<< and
>> Button until the correct date is displayed (holding the button for a few seconds will advance
>> Button to select your time zone. The time display will show
<< or >> Button until the correct
<< or