Chapter 5 Receiving Faxes; Receiving Faxes Automatically; Receiving Faxes Manually - Epson AcuLaser CX37DNF User Manual

Chapter 5
Receiving Faxes

Receiving Faxes Automatically

Note:
❏ When the machine is turned off, faxes cannot be received. Therefore, be sure to leave the machine
turned on.
❏ To print a received fax, change the paper type to PLAIN PAPER and the paper size to A4, LEGAL,
LETTER or 8 1/2× 13 1/2.
❏ If FAX RX OPERATION/DUPLEX PRINT in the UTILITY menu is set to ENABLE, a received fax
document can be printed on both sides of the paper. For details, refer to "FAX RX OPERATION
Menu" on page 16.
If the RX Mode parameter on the FAX RX OPERATION menu is set to AUTO RX, no special operation is
needed in order to receive the fax. Reception begins after the specified number of rings.
Note:
❏ If the RX Mode parameter on the FAX RX OPERATION menu is set MANUAL RX, the fax is not received
automatically. For details, refer to "FAX RX OPERATION Menu" on page 16.
❏ If MEMORY RX MODE function is set to ON, printing does not begin automatically after the fax is
received. A received document is saved in memory and is printed at the time specified for MEMORY RX
MODE function. In addition, if MEMORY RX MODE function is set to OFF, the fax is printed. For details
on MEMORY RX MODE function in the UTILITY menu, refer to "FAX RX OPERATION Menu" on
page 16. For details on specifying the settings for MEMORY RX MODE function, refer to "Setting Up the
Memory RX Mode" on page 20.

Receiving Faxes Manually

Note:
❏ When the machine is turned off, faxes cannot be received. Therefore, be sure to leave the machine
turned on.
❏ To print a received fax, change the paper type to plain paper and the paper size to A4, LEGAL,
LETTER or 8 1/2
×
13 1/2.
Epson AcuLaser CX37DNF Facsimile User's Guide
Receiving Faxes 48