Table of Contents
Advertisement
3. Check that MEMORY RX MODE is selected, and then press the Select key.
4. Using the u or d keys, select OFF, and then press the Select key.
The password input box appears.
Note:
If no password was specified, memory reception mode is canceled.
5. Enter the password, and then press the Select key.
Memory reception mode is canceled.
Note:
If faxes are saved in memory, printing of the faxes begins.
Specifying Forwarding Settings
1. Press the u or d key to select UTILITY, and then press the Select key.
2. Press the u or d key to select FAX RX OPERATION, and then press the Select key.
3. Press the u or d key to select FORWARD, and then press the Select key.
The FORWARD setting appears.
4. Press the u or d key to select ON or ON (PRINT), and then press the Select key.
5. Enter the destination, or select from the speed dial destinations.
Note:
❏ To select from the speed dial destinations, press the Addressbook key, type in the speed dial
number, and then press the Select key.
❏ An e-mail address can also be specified.
6. Press the Select key.
The forwarding settings are specified.
Epson AcuLaser CX37DNF
Control Panel and Configuration Menu
Facsimile User's Guide
21
Advertisement
Table of Contents
