Verified Account Code Changes - Toshiba Strata DK8 User Manual

STRATA DK DIGITAL TELEPHONE
To Record a Voluntary Account
Code:
1. After seizing a CO line or
during the call, press the
Account Code button.
. . . or . . .
Press the Speed Dial (or
button and dial 5 0.
2. Enter the Account Code.
To Add, Delete, or Change
Verified Account Codes From a
Designated Station:
1. Press the Intercom button,
then dial the Verified Account
Code Change Access Code.
Your conversation will not be interrupted.
) Your conversation will not be interrupted.
*
When your station is set for Verified Account Codes, you will hear a
confirmation tone (one-half second duration) if the code is valid (Note 2).
If the code is invalid, you will hear two short tones. Repeat Steps 1 and 2
to dial another account code; the last code entered will be recorded.
Any digits dialed after the code has been entered will be treated as part
of the outside telephone number.
NOTES:
1. Voluntary Account Codes can be set in system programming to
change the Toll Restriction classification of your station. See your
system administrator for more information.
2. If your station is programmed not to verify Account Codes, you will
not hear a confirmation tone.
3. The outside party will not be able to hear tones when the Account
Code digits are being entered or any confirmation tones.
4. Voluntary Account Codes must be entered before the call is
disconnected.

VERIFIED ACCOUNT CODE CHANGES

If the system is set for Verified Account Codes, station users must enter
specific codes when entering Forced or Voluntary Account
Codes.Verified Account Codes are established in system programming
or by designated stations.
You will hear confirmation tone.
For security reasons the Account Code Change Access Code is not
provided in this guide. Contact your system administrator for this access
code.
FEATURE OPERATION
2-35