Feature Operation; Outside Calls - Toshiba Strata DK8 User Manual

Chapter 2
STRATA DK DIGITAL TELEPHONE
To Make an Outgoing Call by
Direct Access:
1. Lift the handset.
2. Press any available Line
button.
. . . or . . .
Press any available
Pooled Line Grp button.
3. Dial a telephone number.
4. Hang up when the call is
completed.
To Make an Outgoing Call by
Dial Access:
1. Lift the handset.
2. Press the Intercom button.
3. Dial a CO line access code.
4. Dial a telephone number.

OUTSIDE CALLS

You can make calls to or receive calls from telephones outside of the
STRATA DK system.
If programmed for Automatic Off-hook Selection, your station will seize a
CO or intercom line when you lift the handset.
After you press the Line button, you should hear CO line dial tone, and
the Line LED will flash green at the in-use rate.
You will hear CO dial tone, and the Pooled Line Grp LED will flash green
at the in-use rate.
You will no longer hear dial tone after dialing the first digit of the number,
but the LED will continue to flash at the in-use rate.
The LED should turn off.
If programmed for Automatic Off-hook Selection, your station will seize a
CO or intercom line when you lift the handset. If so, skip to Step 4.
After you press the Intercom button, you will hear intercom dial tone, and
the Intercom LED will flash green at the in-use rate.
CO line access codes are 7 0 1 ~ 7 0 4 (for DK8) and 7 0 1 ~ 7 0 8 (for
DK16). With some systems, you may have to dial either the general
group code (9), Least Cost Routing (LCR) code (9), or a Line Group
code (8 1 ~ 8 8 for DK8, 8 1 ~ 8 8 for DK16), instead of a CO line number
access code.
The LED will continue to flash at the in-use rate.

FEATURE OPERATION

2-1