Remote Control Features And Operations; Setting Batteries; Operating On The Remote Control - Yamaha MCX-2000 Owner's Manual

MCX2000.book Page 16 Monday, September 12, 2005 11:09 AM

Remote Control Features and Operations

You can use the supplied remote control to do most of the MCX-2000 operations (such as selecting a menu item or
determining a setting value). Prepare the remote control before operations.

Setting Batteries

Set batteries inside the remote control as shown below.
1 Remove the bottom cover of the remote control.
2 Set two AA batteries (supplied) in appropriate directions, according to the illustration in the compartment.
3 Slide the cover until it snaps into place.
n
If the remote control doesn't work well, the batteries may be weak. Replace them with generic two AA batteries. Always handle batteries
appropriately, according to the safety precautions at the beginning of this manual.

Operating on the Remote Control

When operating on the remote control, direct the IR transmitter to the IR receiver on the MCX-2000 front panel.
MCX-2000 Owner's Manual
16
1
3
2
MCX-2000
30 ˚
IR receiver
6 meters
(approx.)
30 ˚
Remote control