Daylight Saving Time Setting - Sharp AL-2060 Operation Manual

Daylight Saving Time Setting

Enable this setting to have the internal clock automatically move forward and backward at the beginning and end of
Daylight Saving Time. The clock will move forward and backward as follows:
The last Sunday in March: 1:00 A.M.
The last Sunday in October: 1:00 A.M.
If a transmission is in progress when the clock adjustment time for daylight savings time arrives, the clock will not
Note
be adjusted until the transmission ends.
Follow these steps to enable Daylight Saving Time.
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [ ] key (
until "2:ENTRY MODE" appears, and
then press the [OK] key.
Selection
"2:ENTRY MODE"
3
Press the [ ] key (
until "5:DAY LIGHT SAVING" appears,
and then press the [OK] key.
Selection
"5:DAY LIGHT SAVING"
4
Press the [ ] key (
to select "1:ON" or "2:OFF".
1,2,3,
1,2,3,
SP. FUNC
2:00 A.M.
0:00 A.M.
) or [ ] key ( )
) or [ ] key ( )
) or [ ] key ( )
Select "1:ON" to enable
the function.
Select "2:OFF" to disable
the function.
5
Press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC
6
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
INITIAL SETTINGS
Press the [MENU] key to
exit.
25
2