Setting The Date And Time - Sharp AL-2060 Operation Manual

INITIAL SETTINGS
8
Press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC

SETTING THE DATE AND TIME

The date and time that appear in the display are printed at the top of each page you transmit. Set the date and time
by pressing the keys on the operation panel as shown below.
If you enter an incorrect number, press the [CLEAR] key (
The time can be displayed in 12-hour or 24-hour format. "Month/Day/Year", "Day/Month/Year" or "Year/Month/Day"
can be selected for the order of display of the date.
Use the following procedure to set the date and time:
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [ ] key (
until "2:ENTRY MODE" appears, and
then press the [OK] key.
Selection
"2:ENTRY MODE"
3
Press the [ ] key (
until "2:DATE&TIME SET" appears,
and then press the [OK] key.
Selection
"2:DATE&TIME SET"
4
Enter the year (four digits), month (two
digits), and day (two digits) with the
numeric keys and then press the [OK] key.
ENTER DATE (2008-)
2008/01/02
Year Month Day
The year can be entered from 2008.
22
9
10
11
12
) or [ ] key (
) or [ ] key (
5
13
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
) and re-enter the number.
5
Enter the time (hour (two digits) and
minute (two digits)) with the numeric
keys.
Enter the hour in the following range:
When 12-hour format is selected: 01 to 12
When 24-hour format is selected: 00 to 23
6
Press the [
to select "AM" or "PM".
)
1,2,3,
1,2,3,
SP. FUNC
7
Press the [OK] key.
)
1,2,3,
1,2,3,
SP. FUNC
8
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
Press the [MENU] key to
exit.
] key ( ) or [ ] key (
When 24-hour format is
selected, do not perform
this step.
Press the [MENU] key to
exit.
)