Connections; Connecting The Telephone Line Cord - Sharp AL-2060 Operation Manual

Hide thumbs Also See for AL-2060:

Table of Contents

Chapter 1

INSTALLATION

CONNECTIONS

Use only the provided telephone line cord to connect the machine to the wall telephone socket. As shown in the

illustration, insert the end of the cord with the core into the LINE socket on the side of the machine as shown in the

illustration. Insert the other end (without the core) into the adapter and insert the adapter into the wall telephone

socket. For more information, contact your nearest Sharp service center.

Please note that the adapter is not necessary for Nordic countries.

The "TEL" jack is used to attach an extension telephone or answering machine to the machine. (See

"CONNECTING OTHER DEVICES" (p.12))

If your area experiences a high incidence of lightning or power

Note

surges, we recommend that you install surge protectors for the

power and telephone lines. Surge protectors can be purchased

from your retailer or at most telephone specialty stores.

Wall socket

Adapter

ABOUT THE OPERATION MANUALS

The operation manuals for the machine are as follows:

Operation Manual (for facsimile)(this manual) (on the CD-ROM)

This manual explains the procedures for using the machine as a fax machine.

This manual only explains the fax functions of the machine. For general information on using the machine, including

safety information, installation, paper loading, removal of paper misfeeds, and peripheral equipment, see the

operation manual for the machine.

For United Kingdom

Insert firmly until

you hear a "click".

For other countries

LINE socket

Table of Contents