Engineer Reset; Anti-Code Reset - Texecom PREMIER 24 Master User Manual
Security control panels premier series
Hide thumbs
Also See for PREMIER 24:
- Installation manual (92 pages) ,
- User manual (13 pages) ,
- Addendum manual (13 pages)
Table of Contents
Advertisement
Operating the Alarm System
ENGINEER Reset
If the system has been programmed to be reset by an Engineer following an alarm
activation, you will still be able to silence the alarm by entering a valid User code (see
page 19 for details).
!"
The system cannot be armed again until the alarm has been reset.
Contact the telephone number on the display (if programmed) or
the telephone number on the last page of this User Guide.
ANTI-CODE Reset
If the system has been programmed to be reset using an Anti-Code following an alarm
activation, you will still be able to silence the alarm by entering a valid User code (see
page 19 for details).
!"
The system cannot be armed again until the alarm has been reset.
The display will show a random code number i.e. 4281
Contact the telephone number on the display (if programmed) or the telephone
number on the last page of this User Guide and quote the random code number.
If the Anti-code is correct, the keypad will chime to indicate that the system
20
To reset the alarm, proceed as follows:
To reset the alarm, proceed as follows:
Enter a valid User code
8&,55$40+0<$;(&
%13.V/(H,
]=(3,$L$S@^A
4,F#6$L$VVVV
You will be given a 4-digit Anti-Code i.e. 5624
Enter the Anti-code that has been given to you
]=(3,$L$S@^A
4,F#6$L$T?@S
has been reset and the display will return to normal.
1111
Press
)
Premier Series User Guide
INS177
- Quick Links:
- Reset and Service Messages
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the PREMIER 24 and is the answer not in the manual?
Questions and answers
reset alarm intermittent beeping
To reset the Texecom Premier 24 alarm and stop the intermittent beeping, follow these steps:
1. Enter a valid User code.
2. Press the Reset button.
3. If the system requires an Anti-Code reset:
- Enter a valid User code to silence the alarm.
- The display will show a random code.
- Contact the telephone number provided in the system or manual and provide the random code.
- You will receive a 4-digit Anti-Code.
- Enter the given Anti-Code.
- If correct, the keypad will chime, and the display will return to normal.
If the battery and charger faults persist, there may be an issue with the panel charging circuit.
This answer is automatically generated