Sanyo PLC-XE50A Owner's Manual page 48

Setting
Terminal
The COMPUTER IN 2/MONITOR OUT terminal on the back
of the projector is switchable for computer input or monitor
output (p.10). Select Computer 2 or Monitor Out with the
Point buttons.
7 8
Computer 2......computer input
Monitor Out......monitor out
Terminal function is not available when Computer 2 to the
input source is selected. Change the input source to the
others (Computer1 or Video) so that the Terminal function is
available (pp.26, 36–37).
Input search
This function detects the input signal automatically. When
finding a signal, the search will stop. Use the Point
buttons to select one of the followings.
Off ...... Input search does not work.
On1 ...... Input search works under the situation below.
•When the COMPUTER button or VIDEO button
on the remote control is pressed.
On2 ...... Input search works under the situation below.
•When the projector is turned on with pressing
the ON/STAND-BY button on the remote control.
(After the countdown)
•When the COMPUTER button or VIDEO button
on the remote control is pressed.
•When the current input signal is missed. ✳
✳ If the No show or Freeze function is active, cancel it
to activate the Input search. It is not available when
On-Screen menu is displayed.
Power management
For reducing power consumption as well as maintaining
the lamp life, the Power management function turns off the
projection lamp when the input signal is interrupted and no
button is pressed for a certain period.
When the input signal is interrupted and no button is
pressed for more than 30 seconds, the timer display with
"No signal" appears. The countdown starts to turn off the
lamp.
48
7 8
✔Note:
• While Input search is set On1 or On2, the
status of Input and Lamp are displayed
every time the signal is switched.
• Only the input source selected at the last
time can be detected.
• If the COMPUTER/VIDEO button on the
remote control is pressed while Input
search is on, Input search will stop and go
back to the previous input sign.
Power management
Time left before Lamp is off.