For Zooming In And Out The Images - Sanyo PLC-XE50A Owner's Manual

Custom
Adjust the screen scale and position manually with this
function.
Press the SELECT button at Custom and the "Custom" is
displayed on the screen for a few seconds and then the
Aspect dialog box appears.
Scale H/V......... Adjust the Horizontal/Vertical screen scale.
H&V ............... When set to "On, " the aspect ratio is fixed.
"Scale V" appears dimmed and becomes
unavailable. Adjust "Scale H, " then the
screen scale is automatically modified
based on the aspect ratio.
Position H/V...... Adjust the Horizontal/Vertical screen
position.
Common......... Save the adjusted scale to all the inputs.
Press the SELECT button at Common to
display a confirmation box. To save the
scale, press the SELECT button at "Yes. "
When Custom is selected, the saved scale
is used.
Reset............ Reset the all adjusted values. Press
the SELECT button at Reset to display
a confirmation box. To reset, press the
SELECT button at "Yes. "

For zooming in and out the images

Digital zoom +
When Digital zoom + is selected, the On-Screen Menu
disappears and "D. zoom +" is displayed. Press the SELECT
button to expand the image size. Use the Point
buttons to pan the image. The Panning function can work
only when the image is larger than the screen size.
A projected image can be also expanded by pressing the
D.ZOOM button on the remote control.
e
Digital zoom –
When Digital zoom – is selected, the On-Screen Menu
disappears and "D. zoom –" is displayed. Press the SELECT
button to compress image size.
The projected image can be also compressed by pressing
the D.ZOOM button on the remote control.
d
To exit the Digital zoom +/– mode, press any button except
the D.ZOOM , SELECT, and Point buttons.
ed
To return to the previous screen size, select a screen size in
the Screen Size Adjustment or select an input source from
the Input Source Selection (p.26) again, or adjust the screen
size with the D.ZOOM
ed
ed7 8
buttons.
Press the SELECT button at
Common or Reset, to display
a confirmation box.
✔Note:
•When no signal is detected, "Normal" is
set automatically and the Aspect dialog
box disappears.
•The adjustable range for Scale H/V and
Position H/V is limited depending on the
input signal.
/
Remote Control
POINT buttons
SELECT button
D.ZOOM + button
D.ZOOM - button
✔Note:
•The panning function may not operate
properly if the stored Mode in the PC
Adjust Menu is used (p.30).
•The minimum compression ratio is limited
depending on the input signal, when the
Keystone function is working or when the
custom is selected for the screen size.
•True, Full, and Digital zoom +/– cannot be
selected when 480i, 575i, 480p, or 575p
is selected in the PC System Menu (p.27).
•Digital zoom +/– cannot be selected when
Full or True is selected.
Computer Input
35