Accessories/Parts Identification; Parts List; Control Panel Overview - Panasonic SD-ZB2502 Operating Instructions And Recipes

Accessories/Parts Identification

Raisin nut dispenser
The ingredients placed in the raisin nut dispenser will drop into the
bread pan automatically upon selecting
the menu with raisin (03, 06, 14, 17, 19 and 25).
Turn to P. 14 for ingredients which
may be placed in the raisin nut dispenser.
Never operate the Bread Maker without the
dispenser being in place.
Control panel
Accessories
Measuring cup Measuring spoon
To measure out liquids To measure out sugar, salt, yeast,
etc.
(15 mL)
(max. 310 mL)
Tablespoon Teaspoon
• 10 mL increments • 1 ⁄ marking • 1 ⁄
2 4
markings
6
Raisin nut dispenser flap
Dispenser lid
Kneading blade
(rye bread)
Yeast dispenser
Kneading blade
(wheat bread and
gluten and wheat
free bread)
Handle
Bread pan
(5 mL)
, 1 ⁄ , 3 ⁄
2 4
Control Panel
Main Unit
Lid
Menu
Press this pad to choose menu. Menu number will
display and each time this pad is pressed, menu
number will change to the next choice.
(Hold the pad to advance more quickly)
See P. 10 and 11 for menu number.
Plug
 Operation status
: displayed for the current stage of the program. Ingredients are being regulated on
the 'Rest' stage before kneading.
: displayed when there has been an interruption in the power supply.
: displayed when adding ingredients manually on menu 11 and 23.
 Time remaining until program finished
Also when adding ingredients manually, display
will show the time until adding extra ingredients in
the program.
Size Crust
Press this pad to choose Press this pad to
size. See P. 10 for choose crust colour.
available menu. See P. 10 for available
menu.
• XL
• Dark
• L
• Medium
• M
• Light
Timer
Set delay timer (time until bread is
ready) or set the baking/cooking
time for menu 15, 26 and 27.
'▲' Press this pad to increase the
time.
'▼' Press this pad to decrease
the time.
This picture shows all words and symbols, but during operation only those relevant will be displayed.
Start
The start light will
flash during program
selection. Press the start
pad when programming
is completed.
When the start pad is
pressed, the start light
will stop flashing and
become constant.
Stop
If you wish to change the
program, you must stop the
operation by holding down the
stop pad for more than 1 second.
The start light will go off. Then
re-program accordingly.
7