Listening To Radio - Sanyo DMP-P7 Instruction Manual

Listening to a non-docking iPod or other portable audio devices
If you are using an iPod without a docking port or other MP3 player or other portable audio device, you can still
play it through the clock radio via the AUX IN Jack.
NOTE: To use the AUX IN Jack, make sure no iPod is docked in the clock radio.
1. Plug one end of the audio connecting cable into the AUX OUT Jack on your device and the other end of the
connecting cable into the clock radio AUX IN Jack, located on the back of the unit.
2. Press the PLAY/PAUSE Button on the clock radio (or PLAY/PAUSE Button on the remote control). The
AUX Icon will appear, indicating AUX playing mode.
3. Turn on and play your device.
4. Press the VOLUME UP or DOWN on the clock radio (or Volume+ and Volume- Button on the remote
control) to adjust the system volume. You may need to adjust your device volume, too.
5. To turn off the unit, press the POWER Button (or POWER ON/OFF Button on the remote control). Please
remember to turn off your device, too.
Note: Extend FM wire antenna fully for best FM reception (do not strip, alter or attach to other antennas). The
AM loop antenna should be placed up to 12" away from the unit for best reception. Rotate the AM loop antenna
as required for best AM reception.
1.
Press the BAND/RADIO Button on the clock radio to play the radio. The radio frequency appears at the
lower of the display. Press the BAND/RADIO Button on the clock radio repeatedly to select AM or FM band.
Press the SKIP FORWARD or BACKWARD Button on the clock radio (or
2.
control) to tune in the desired station. Press the
scan to the next clear station. Hold for seek mode.
Press the ST/MONO Button (or ST/MONO on the remote control) to ST/MONO switches the receiver
3.
between FM stereo and mono modes. Mono reduces the noise heard when listening to weak FM stations.
Press the VOLUME UP or DOWN Button on the clock radio (or Volume+ and Volume- Button on the
4.
remote control) to adjust the system volume.
Press the MUTE Button on the remote control to turn OFF the sound. Press the MUTE Button again or
5.
Volume +/- buttons on Handset to restore the sound.
To turn off the unit, press the POWER Button (or POWER ON/OFF Button on the remote control) to turn it
6.
off.

Listening to Radio

or
10
or
Button on the remote control again to Auto
Button on the remote