Connections - Sanyo DC-HT818 Instruction Manual

Connections

2.4 Line Input
This unit has a group of stereo
audio input terminals, i.e. LINE
INPUT (on the rear panel). You can
input the analogue stereo audio
signals from extra device such as
DVD, VCD, CD, VCR player, etc by
connecting it via the input terminals.
Use the audio cable (white for left ,
red for right) to connect the stereo
audio output terminals of a DVD,
VCD, CD, VCR player, etc to the
stereo input terminals of this unit.
After the connections have been
correctly made, press [
to switch to the corresponding
signal source LINE to enjoy the
audio from the connected extra
device.
2.5 FM/AM CONNECTIONS
AC POWER CONNECTION
After checking all the connections have been made correctly,plug the AC power lead of
this unit into the wall socket,then switch the power switch to the on position .
NOTE:
Unplug the AC power lead from the wall socket if the unit will not be in use for a
prolonged period of time.
Audio Output of Extra Devices
FUNCTION ]
-10-
2-CH AUDIO OUTPUT
L L R R
L L R R
LINE INPUT
DVD Audio Input