Table of Contents
Advertisement
����������������������������
����������������������������
������������������������������
Fig. 7
TW966
Installing
�
�
�
�
�
�
�
�
�
�
�
�
�
�
(continued)
Electrical connection (Fig.7)
Before making the electrical connections, check
that:
-the ground cable is 2 cm longer than the other
cables;
-the system ratings meet the ratings indicated on
the identification plate fixed on the lower part of
the worktop;
-the system is fitted with efficient earthing compliant
to the laws and regulations in force.
Earthing is obligatory by law.
If the domestic appliance is fitted with a cable with
plug, must be installed in order that the socket is
easily accessible.
If the domestic appliance is fitted with a cable
without plug, an omnipolar switch must be
interposed with a minimum opening of 3 mm be-
tween the contacts and suited to the load indicated
on the plate and conform to the regulations in force
(the yellow/green ground conductor must not be
interrupted by the switch). When the appliance
has been installed, the omnipolar switch must be
easily reachable.
If the appliance is not fitted with a cable, use
type:"H05V2V2-F".
At no point must the cable reach a temperature
50°C higher than room temperature.
- 23 -
GB
Advertisement
Table of Contents
