Table of Contents
Advertisement
BCS Adjust
Brightness
The screen brightness can be adjusted from 0 to 255 stages, and the default is 128. The brightness
may differ depending on the equipment and PC monitor status.
Contrast
The screen contrast can be adjusted from 0 to 127 stages, and the default is 73. The contrast may
differ depending on the equipment and PC monitor status.
Saturation
The screen saturation can be adjusted from 0 to 127 stages, and the default is 64. The saturation
may differ depending on the equipment and PC monitor status.
MPEG4 Video Stream
Frame rate
Upon the real-time play, users should select a frame refresh rate per second. If the rate is high, the
image will become smooth. On the other hand, if the rate is low, the image will not be natural but it
can reduce a network load.
Bit-rate control
It refers to the type of using a variable bit rate (VBR). Increase a bit rate for
Variable bit rate (VBR):
the image with much motion, and decrease a bit rate for the image with little motion. The basic
setting value is a VBR type.
Using a constant bit rate (CBR) may guarantee a stable play. However, if a
Constant bit rate (CBR):
large amount of data is not required, it may cause the waste of a transmission rate. If a large
amount of data is required, it may cause the image quality to be decreased.
Profile
SP (Simple Profile) is available up to the CIF resolution and 384kbit/s.
ASP (Advanced Simple Profile) is available up to the 4CIF resolution and 8000kbit/s.
GOV size
Enter the GOV (group of VOP) size. If users want to have a high quality of fast image one by one,
please decrease the value. For the purpose of general monitoring, please do not change a basic
value. Such act may cause a problem to the system performance. For the details of GOV setting,
please contact the service center.
- 27 -
Advertisement
Table of Contents
