2.4.2 Connecting Network
The Dome Network Camera supports the operation through the network. Therefore, it is necessary
to connect a standard RJ-45 cable to it. Generally a cross cable is used for directly connection to
PC, while a direct cable is used for connection to a hub.
2.4.3 Connecting Audio in/out connector
2.4.4 Connecting the Power
Connect the power of DC 12V 1A to the dome camera.
Use certified / Listed Class 2 power supply transformer only.
The Dome Network Camera enable voice
transceiving through the audio input/output module
interworked. Use it after connecting the port to the
microphone and speaker, which have an amplifier
function.
- 7 -