Panasonic HL-BT62S Operating Instructions & Installation Instructions page 24

Using the oven
Programmed cooking
Using delay start
„ Notes
The Delay start function can be
used to set the end time of a
cooking operation which will start at
a later time.
Use of the delay start function is not
recommended for cooking operations
that require a preheated oven, such
as pizzas and cakes.
Select a cooking function as described
on page 18 EN, Selecting a function.
Press the symbol
. The display
will show the digits
(flashing).
Press or to set the number of
minutes of cooking from 00:01 to 13:00
(hold down the symbols to increase or
decrease more quickly). After selecting
the desired time period press the
symbol . will stop flashing.
will flash and the cooking end time
will be displayed. Change the cooking
end time with or
A few seconds after the last key is
pressed,
that point the appliance will wait for the
cooking start time.
During the delay before starting it is
not possible to select another cooking
and
function.
When cooking is complete, the word
stop
will flash in the display, cooking will be
interrupted and a buzzer will sound
which can be silenced by pressing
.
It is also possible to select a different
cooking time whilst in the programmed
cooking mode by pressing
22
CAUTION
For safety reasons, when setting
programmed cooking using delay
start a cooking duration must be
programmed first and then set the
cooking end time. It is not possible
to set the cooking end time by itself
without setting the cooking duration.
will stop flashing and from
or .
EN
.
, then