Kenmore N8MSL0701412A1 Installation Instructions Manual page 25

Figure 27 - Chimney Inspection Chart
CHIMNEY INSPECTION CHART
For additional requirements refer to the National Fuel Gas Code NFPA 54/ANSI Z223.1 and ANSI/NFPA 211
Chimneys, Fireplaces, Vents, and Solid Fuel Burning Appliances
Crown
condition: Rebuild
Missing mortar crown.
or brick?
Is chimney
property lined with
clay tile liner?
No
Is Repair
liner and top liner or top seal
seal in good or reline chimney as
condition? necessary.
Yes Repair
in cleanout? Mortar
Mortar, tile, or tile
fuel oil residue? debris?
Clay
tile misalignment,
missing sections,
gaps?
Condensate
Remove metal vent
or liner.
Yes
lined with properly
sized, listed liner or
Yes
Reline
Part B of
instructions for
Remove mortar
and tile debris
Not Suitable
Install chimney I
adapter per
instructions. _lot Suitable
1
1
>
Line chimney with property
sized, listed flexible metal
liner or Type-B vent per
NFGC Vent
Sizing Tables and liner or
vent manufacturer's
Installation instructions.
Chimney
exposed to
outdoors below
roof line?
Is chimney
to be dedicated to
a single
furnace?
Part Col
instructions for
application
3uitable
_r
1stall chimney I
adapter per
instructions.
A10133
441 01 1402 02 25