Cub Cadet TANK SZ 54 Operator's Manual page 25

Standard set-up
Stems (Dandelion, Bahia,
Buckhorn, etc.)
Very Lush &/or tall grass
Low cut height (1 to 2")
Mulch
Material collection
Abrasive (sandy), dry
Wet
Table Notes: This table is a general outline of suggested settings, mowing conditions may vary.
Inner Baffle: The inner baffle regulates grass discharge. Remove the inner baffle for high-volume grass and install the inner baffle for
precision cutting.
Discharge Baffle: The discharge baffle enhances the grass discharge pattern. The discharge baffle reduces clumping and should be
removed for mulching.
Gauge Wheels: The gauge wheels reduce scalping, help with precision cutting and reduce turf defacement during turns.
Rear Rollers: The rear rollers reduce scalping and gives grass a striped appearance.
Cutting Blades: The cutting blades cut grass, create grass lift and discharge grass through the discharge chute.
Discharge Chute: The discharge chute controls the mower deck discharge and enhances the discharge pattern
NOTE: To avoid damaging grass, no more than 1⁄3 of the grass height should be removed during a single cutting (i.e. if the grass is 6"
tall, cut it to 4").
Reconfigurable Mower
Discharge
Inner Baffle Baffle
Installed Installed
Removed Installed
Removed Installed
Installed Installed
Installed Removed
Installed Installed
Removed Installed
Installed Installed
Cutting Gauge
Blades Wheels
Hi-lift Low = 3 to 5"
High = 1 to
2-1⁄2"
Hi-lift
Low = 3 to 5"
High = 1 to
2-1⁄2"
Hi-lift
Low = 3 to 5"
High = 1 to
Low-lift
2-1⁄2"
High = 1 to
2-1⁄2"
Hi-lift/Mulch
Low = 3 to 5"
High = 1 to
2-1⁄2"
Hi-lift
Low = 3 to 5"
High = 1 to
2-1⁄2"
Low-lift
Low = 3 to 5"
High = 1 to
2-1⁄2"
Hi-lift
Low = 3 to 5"
Front Roller Rear Rollers
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to High = 1 to
2-1⁄2" 2-1⁄2"
Low = 3 to 5" Low = 3 to 5"
High = 1 to
High = 1 to
2-1⁄2"
2-1⁄2"
Low = 3 to 5"
Low = 3 to 5"
S 5 — o
ection peration
25