Seat Adjustment - Cub Cadet TANK SZ 54 Operator's Manual

4. Insert the wiring harness into the bottom of the seat as
shown in Figure 3-12.
Figure 3-12
NOTE: When the harness is connected, be sure to push the
excess wire from the wire harness into the seat box hole before

Seat Adjustment

continuing.
This machine is equipped with an adjustable seat, which includes
a retractable seat belt assembly and an Operator Presence Sensor
(OPS). The OPS in the form of a switch, is integrated into the seat
bottom and is connected to the machine electrical system.
The seat can be adjusted forward and backward, the armrests
can be adjusted up and down, the mechanical suspension
mechanism weight/ride adjustment controls can be adjusted for
weights between 125- and 275-pounds, a lumbar support can be
adjusted and the seat can tilt forward and backward.
To move the seat forward or back, locate the seat adjustment rod
under the seat. Push the rod to the left and slide the seat forward
or back into the desired position and release the rod when the
seat is in the desired position. See Figure 3-13.
Figure 3-13
The mechanical suspension mechanism incorporates weight/ride
adjustment controls for operators in the 100 to 280 lb. weight range
(turn the knob on the front of the seat clockwise to increase the
weight capacity and counter-clockwise to decrease. See Figure 3-14.
Arm Rest Height
Suspension Mechanism
Lumbar Support
Figure 3-14
The seat tilt is controlled by the knob on the left of the seat. Turn
the knob reaward to tilt the seat back, turn the knob forward to
tilt the seat forward. See Figure 3-14.
To vary the lumbar support move the lever on the right of the
seat up and down. See Figure 3-14.
To adjust the height of the arm rests, lift the arm rest and rotate the
knob under the arm rest right or left to increase or decrease the
height. See Figure 3-14.
NOTE: The seat base must be secured by the latch, otherwise, the
seat assembly could tilt forward. The Operator Presence Sensor
must be connected to the electrical wiring harness.
S
ection
Seat Tilt
3 — A & S -U
SSembly et p
15