Table of Contents
Advertisement
Installation
Mounting the Camera (Continued)
Process after connection
Fill the conduit hole and mounting holes with sealing agent and insert
the silica gel.
1 Fill the conduit hole and the screw mounted holes (2 locations)
with sealing agent (GE silicon)
Seal the holes completely. Failure to do so may cause water or
Note
moisture to enter, thereby fogging the lens and dome cover.
2 Remove the silica gel (provided) from its bag and insert in the
position as shown in the diagram
1
This illustration is
*
for the purpose of
explanation.The
camera unit is not
shown here.
.
When mounting the camera under raining conditions, make
Note
sure that rain does not enter into the camera.
Be sure to use the silica gel provided. Failure to do so may
fog up the camera lens and dome cover.
If you are not adjusting the camera angle soon after
mounting the camera, insert the silica gel (provided) only
after adjustment. Prolonged exposure to air will make the
silica gel (provided) less effective.
E-26
Sealing material
Lug plate
Secure the silica
*
gel with the lug
plate such that it
will not drop.
Silica gel
Silica gel insertion space
2
Advertisement
Table of Contents
