Table of Contents
Advertisement
Setup
Setting the Switches
Before mounting the camera, set the function setting switches on the
camera.
To set the switches, use a fine-tipped screwdriver.
DIP switch settings chart
Function selection switches
1 [D/N AUTO/OFF]DAY & NIGHT Selector Switch
.
Set this to "AUTO" when shooting a subject with continually changing
brightness (day/night). The image switches to color when the subject is
bright, and black and white when it is dark. The image is set to color at
all times when "OFF" is selected.
(Default setting: AUTO)
Memo You can set the image to black and white at all times using the
menu.
2 [BLC OFF/ON] Backlight Compensation Selector Switch
Set this to "ON" when shooting in backlight. The subject becomes
easier to see as brightness is adjusted according to the photometry
area set in [BLC AREA] of the menu.
(Default setting: OFF)
Memo Refer to [BLC AREA](A page 47).
3 [MONITOR TYPE LCD/CRT] Monitor Type Selector Switch
Set this to "LCD" or "CRT" according to the monitor in use.
(Default setting: LCD)
Memo Refer to [LCD TYPE](A page 49).
4 [WIDE-D OFF/ON] WIDE-D Selector Switch
When this is set to "ON", subjects with a high contrast can be seen
clearly and naturally.
(Default setting: OFF)
E-22
1
D/N
AUTO
2
BLC
OFF
3
MONITOR
LCD
TYPE
4
WIDE-D
OFF
OFF
ON
CRT
ON
Advertisement
Table of Contents
