Profiles (Menu 3); Settings (Menu 4); Alarm Clock; Copyright © 2004 Nokia. All Rights Reserved - Nokia 6310i User Manual

your calls to a certain amount of charging
units or units of currency. The PIN2 code is
needed for the call cost settings.
Note: When no more charging units
or currency units are left, calls may
only be possible to the emergency
number programmed into your
phone (e.g. 112 or other official
emergency number).
• GPRS data counter
amounts of data that were last sent and
last received, data sent and received in
total, and to clear the counters. The
counter unit is a byte.
• GPRS connection timer
check the duration of the last GPRS
connection or the total GPRS connection.
You can also clear the timers.
Profiles
(Menu 3)
Your phone has various setting
groups, or profiles, for which you can
customise the phone tones for different
events and environments. At first, personalise
the profiles to your liking and then you only
need to activate a profile to use it.
Available profiles are General, Silent,
Meeting, Outdoor, and Pager.
Press Menu and select Profiles. Scroll to a
profile and press Select.
• To activate the profile, select Activate.
Tip: To change the profile quickly in
standby mode, press the power key
, scroll to the profile you want to
activate and press Select.
• To set the profile to be active for a certain
amount of time up to 24 hours, select
Timed and set the time. When the time set
for the profile expires, the previous profile
that was not timed, becomes active.
and scroll to check the
and scroll to
Copyright © 2004 Nokia. All rights reserved
• To personalise the profile, select
Personalise. Select the setting you want to
change and make the changes.
The current settings can also be changed
in the Tone settings
settings on page 34. In addition, you can
rename a profile, Profile
General profile cannot be renamed.

Settings (Menu 4)

Alarm clock

The alarm clock uses the time format set for
the clock. The alarm clock works even when
the phone is switched off.
Press Menu, select Settings
Key in the alarm time and press OK. To
change the time when the alarm time is set,
select On.
When the alarm time expires
The phone will sound an alert tone, and flash
Alarm! and the alarm time on the display.
Press Stop to stop the alarm. If you let the
phone continue to alarm for a minute or press
Snooze, the alarm stops for a few minutes
and then resumes.
If the alarm time is reached while the phone
is switched off, the phone switches itself on
and starts sounding the alarm tone. If you
press Stop, the phone asks whether you want
to activate the phone for calls. Press
switch off the phone or
receive calls.
Note: Do not press Yes
use is prohibited or when it may cause
interference or danger.

Time and date settings

Clock settings
Press Menu, select Settings,
settings and Clock.
M e n u f u n c t i o n s
menu, see Tone
name. The
and Alarm clock.
No to
Yes to make and
when wireless phone
Time and date
31