IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS FOR LATER USE. 14 Outdoor Antenna Grounding - If an outside antenna or cable system FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE is connected to the product, be sure the antenna or cable system is AUDIO EQUIPMENT.
Page 3
PRODUCT TO RAIN OR MOISTURE. CAUTION Changes or modifications to this equipment not expressly approved by CAUTION NAD Electronics for compliance could void the user’s authority to operate TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, this equipment. FULLY INSERT.
Page 4
RECORD YOUR MODEL NUMBER (NOW, WHILE YOU CAN SEE IT) The model and serial number of your new T 587 are located on the back of the cabinet. For your future convenience, we suggest that you record these numbers here: Model no: .
Plastic foot flange SAVE THE PACKAGING Please save the box and all of the packaging in which your T 587 arrived. Should you move or otherwise need to transport your T 587, this is by far the safest container in which to do so. We’ve seen too many otherwise...
Region or BD code described on the disc does not correspond to the Region Ability to view high-definition contents in BD-ROM discs maybe limited or BD code shown on the T 587 rear panel, the T 587 cannot play that disc. depending on the resolution of your TV.
“HOME”. TITLE or MENU option of the disc. Pressing the [ ] button of the BR 1 will switch ON the T 587 from 8 USB INPUT: Connect an external USB device into this input. Refer also standby mode and at the same time open the disc tray.
IDENTIFICATION OF CONTROLS REAR PANEL 1 AC MAINS INPUT: The T 587 comes supplied with a separate AC Mains cable. Before connecting the cable to a live wall socket, ensure first that it is firmly connected to the T 587’s AC Mains input socket. Always disconnect the AC Mains cable plug from the live wall socket first, before disconnecting the cable from the T 587’s Mains input socket.
IDENTIFICATION OF CONTROLS BR 1 REMOTE CONTROL 1 ON: Switch T 587 ON. 7 TITLE/POP-UP: Display DVD title menu or BD-ROM pop menu, if available. 2 OFF: Switch T 587 OFF. MENU: Access menu on a DVD disc, if available.
USING THE T 587 DISPLAY SETUP MENU You may operate the T 587 from its front panel or via the BR 1 remote control. Since the remote control will be the primary controller for most cases, we will focus on remote-controlled operations. Be sure also to read the section, “IDENTIFICATION OF CONTROLS - FRONT PANEL”.
Page 12
1/60 or 1/50 second intervals, the 24 frames do not appear at an even pace. The “24Hz” setting of the T 587’s “1080p Display Mode” option enables the faithful reproduction of such film-based materials, displaying each frame at 1/24 second intervals.
Off: If you choose for the disc subtitle not to come up, select “Off”. AUDIO SETUP MENU Each BD/DVD disc has a variety of audio output options. Set the T 587’s AUDIO options according to the type of audio system you use.
OPERATION USING THE T 587 LOCK SETUP MENU (APPLICABLE TO BD AND DVD PLAYBACK ONLY) RATING The parental rating feature allows you to block access to scenes greater than the rating you set up, thereby preventing your children from viewing material you believe is unsuitable.
You can adjust the default text size displayed for the BD-J contents during NETWORK features. BD-ROM playback. This setting is only valid when BD-J contents do not set the size of text. Please select a font size bigger than 24 when the T 587 is IP MODE connected to an HDTV.
USING THE T 587 - FEATURES USB MODE The T 587 can play back MP3/WMA/PHOTO/PNG/DivX files stored in external USB (Universal Serial bus) devices. The following are the T 587’s capabilities with respect to USB device playability. Support only USB Flash Drive.
The T 587 must be connected to the internet to use the BD-Live functions. It may take up to several minutes to load and start enjoying BD-Live contents.
It is possible to change the subtitle language to a different language from the one selected at the initial settings. This operation works only with discs To repeat the playback of a particular track or chapter, press the T 587’s on which multiple subtitle languages are recorded.
REFERENCE LANGUAGE CODE LIST Use this list to input your desired language for the following settings: DISC AUDIO/DISC SUBTITLE/DISC MENU language. Code Code Code Code Abkhazian 6566 Fiji 7074 Lingala 7678 Singhalese 8373 Afar 6565 Finnish 7073 Lithuanian 7684 Slovak 8375 Afrikaans 6570...
REFERENCE AREA CODE Enter the appropriate code number for setting up the “Area Code”. CODE Country CODE Country CODE Country CODE Country CODE Country CODE Country Afghanistan Chad Germany Luxembourg Papua New Svalbard and Jan Albania Chile Ghana Macau Guinea Mayen Algeria China...
T 587 and the TV. Set the Resolution according to your TV’s capability. The connected equipment is not capable of Connect the audio output of the T 587 to an detecting or decoding audio signal from the equipment with appropriate audio decoders. T 587.
Specifications are subject to change without notice. For updated documentation and features, please log onto www.NADelectronics.com for the latest information about T 587. Manufactured under license under U.S. Patent #: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending.
Page 24
All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited. No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.
Page 25
I'achat, I'origine, chez un depositaire agree de produits NAD. Seuls les depositaires agrees peuvent se presenter en cette qualite, et I'acheteur peut verifier la qualite de depositaire agree du marchand en communiquant avec NAD/Lenbrook au numero suivant: 1-800-263-4641.
Page 26
-VVarranty NAD Electronics of America and Lenbrook/NAD Canada warrants this component to be free from all defects in materials and workmanship as follows: & Electronic components (tuners, preamplifiers, amplifiers, integrated amplifiers, receivers, NY processors, & integrated NY products) 2 years, parts labor Electro-mechanical products (cassette decks, CO players, recorders &...