Appendix A Access Codes; Exchange Line Access Codes - Toshiba StrataCT User Manual

Access Codes
This appendix contains access codes for outside Speed Dial (SD) numbers, Exchange lines, Paging
Group and Paging Zone Codes.

Exchange Line Access Codes

Exchange lines are used when you dial an outside number. If your telephone does not have a
button, you can enter the appropriate code listed in
You can also store the code on a
access code onto a Speed Dial code, enter
447001 447001 447001 447001
enter
In some systems,
users are required to dial
with LCR, you may not hear internal dial tone, depending on system programming.
See your System Administrator for the code which applies to your telephone.
To access a line
Press [PDN] + Exchange Line Access Code.
Strata CT Electronic Telephone User Guide November 2001
SD SD SD SD
).
9 9 9 9
is used as a general group code or to access Least Cost Routing (LCR). System
9 9 9 9
in order to access an outside line. If you press
Table 10
button for one-touch access. If you are storing an Exchange Line
44 44 44 44
before the Line access code (e.g., to store code
on Page 100 to access an outside line.
9 9 9 9
in a system programmed
A
Line Line Line Line
#7001 #7001 #7001 #7001
,
99