1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCP-2120
  6. User manual

Samsung SCP-2120 User Manual

12x speed dome camera
Hide thumbs Also See for SCP-2120:
Table of Contents

Advertisement

Quick Links

Download this manual
12X SPEED DOME CAMERA
User Manual
SCP-2120

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCP-2120

Summary of Contents for Samsung SCP-2120

  • Page 1 12X SPEED DOME CAMERA User Manual SCP-2120...

  • Page 2: Safety Information

    Do not connect multiple cameras to a single adapter. Exceeding the capacity may Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this cause abnormal heat generation or fi re. document, but no formal guarantee shall be provided. Use of this document and the subsequent Securely plug the power cord into the power receptacle.
  • Page 3 This device must accept any interference received including interference that may If this product fails to operate normally, contact the nearest service center. Never cause undesired operation. disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) CAUTION When cleaning, do not spray water directly onto parts of the product.

  • Page 4: Important Safety Instructions

    important safety instructions contents INTRODUCTION Read these instructions. Features Components and Accessories Keep these instructions. Component names and Heed all warnings. functions Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. INSTALLING YOUR CAMERA Speed Dome Camera and Do not block any ventilation openings.

  • Page 5: Troubleshooting

    Versatile protocols and coaxial communication Initialize RS-485, Coaxial communication methods are supported. Password setting RS-485 (10 protocols) : Samsung Techwin, Pelco (D / P), Samsung Electronics, Status Panasonic, Honeywell, AD, Vicon, GE, BOCSH Coaxial Communications: Pelco Coaxitron (automatic detection) •...

  • Page 6: Components And Accessories

    Up to 255 preset positions can be set. Using this function saves and brings up the camera feed of a selected monitoring location. • SSDR (Samsung Super Dynamic Range) For images with high contrast between bright and dark Areas from diffi cult lighting Body...

  • Page 7: Component Names And Functions

    introduction COMPONENT NAMES AND FUNCTIONS Camera Wiring Interface Board For the camera wiring, please refer to the picture below. The camera's wiring interface ❖ ❖ board is fi tted to the housing, this is sold separately. (When using coaxial Front Side communication, a separate control signal connection is not required.) Alarm...

  • Page 8: Installing Your Camera

    Camera Wiring Interface Board SPEED DOME CAMERA AND APPLIANCES WIRING DIAGRAM Control Signal Connection Connecting with Samsung Techwin’s “Stand Alone DVR” · RS485 Communications Controller · RS-485 : Camera or DVR Stand Alone Camera 485+ R+/RX+...

  • Page 9: How To Set Up Protocols And Id Dip Switches

    - 9 Channels: SVR-960/945/950E/940 - 4 Channels: SVR-440/450/470/480  The following is a list of Samsung Techwin DVRs that can fully control the PTZ dome camera via a coaxial cable and RS-485. - 16 Channels: SVR-1680C/1660C/1670 Communication Protocol DIP Switch(SW2) - 9 Channels: SVR-960C This model supports both coaxial and RS-485 communications.
  • Page 10 To use a third party controller with this product, please contact our After-Sales Service Samsung or Technology Department. Pelco-D  Controls Using Different Protocols Pelco-P AD Protocol VICON Protocol GE Protocol Samsung Elec Entering Camera OSD 3+Auxilary ON IRIS OPEN IRIS OPEN Panasonic Exiting Camera OSD 3+Auxilary OFF IRIS CLOSE IRIS CLOSE...
  • Page 11 installing your camera ❖ Camera ID Chart SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 ON/OFF 20_ installing your camera English _ 21 English...
  • Page 12 installing your camera SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 22_ installing your camera English _ 23 English...
  • Page 13 installing your camera SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 24_ installing your camera English _ 25 English...

  • Page 14: Preparing And Installing Camera Bracket

    installing your camera PREPARING ADAPTER AND CABLES (SOLD SEPARATELY) PREPARING AND INSTALLING CAMERA BRACKET For the installation guidelines for the brackets and housings, refer to the user’s manual Power Adapter enclosed with the bracket or housing that is sold separately. Power adapter has the capacity of AC24V 2.5A.

  • Page 15: Installation Examples

    installing your camera INSTALLATION EXAMPLES ON-CEILING MOUNT TYPE INSTALLATION EXAMPLE The pictures below show the front view of the camera installed with a wall or fl ush Attach Template bracket. For more instructions on installing the camera, please refer to the following Attach the template on the ceiling, facing the “Front”...
  • Page 16 installing your camera Assemble Camera & Bracket Connect Cables Connect each camera cable to the proper terminals on the bottom of the camera. For Cameras on the sides 'Align The Arrow' triangle corner mount bracket and the arrow more detailed instructions, please refer to Page 13:“Camera Wiring Interface Board”. shows a match to match.
  • Page 17 installing your camera FLUSH MOUNT TYPE INSTALLATION EXAMPLE Detach the Mount Housing Remove the 3 screws, and then detach the mount housing from the camera. Drill Hole on the Ceiling Attach the template, and then drill a hole according to the 120 mm diameter hole marked on the template.

  • Page 18: Interface Symbols

    installing your camera interface symbols • Install Camera Motion Detection Standby/Operation Display : Install Camera Fit the camera to the hole on the ceiling, and then secure the camera When in standby mode, the " " in the upper right of the screen blinks and then using 3 Product-enclosed Fixture Screws (M4x20).

  • Page 19: Osd Menu Chart

    interface symbols operating your camera • OSD Menu Screen : OSD MENU CHART Camera Setting Focus Mode AUTO/MANUAL/ONESHOT Zoom/Focus Sub Menu Available AUTO/OFF/ Mode White Balance Sub Menu Not Available TRACKING Zoom/Focus Zoom Tracking SLOW/MEDIUM/ Speed FAST Digital Zoom OFF/2X/3X/4X/5X/…/16X ATW/ATW(IN)/ATW(OUT) Press Enter to Start AWC White Balance...

  • Page 20: Operating Your Camera

    operating your camera Image Hold ON/OFF INTERNAL Jog Speed Manual/10/20/30/40/50/60 Sync Line Lock Phase Max Speed Level LINE LOCK 0~359 Camera ID ON/OFF Others Sharpness 1~32 ON/OFF Image Adj. Camera Name Color 0~100 Edit Camera Name Freeze ON/OFF Preset Number ON/OFF Preset Setting/Edit/Home Position/Execute/Clear/Status...

  • Page 21: Functional Description

    functional description CAMERA SETTING Zoom Tracking ► Main Menu/Camera Setting/Focus/Zoom/Zoom Tracking Through this menu you can set up the camera’s Zoom/Focus Settings Main Menu focus mode when zooming. Camera Setting • Focus Mode and Digital Zoom Setting Menu Mode : Sequence Setting ►...
  • Page 22 functional description White Balance Exposure ► ► Main Menu/Camera Setting/White Balance Main Menu/Camera Setting/Exposure The White Balance menu adjusts the balance of the The Exposure settings are to control the camera’s Main Menu Main Menu screen colors under different lighting conditions. exposure meter.
  • Page 23 Main Menu Main Menu/Camera Setting/Back Light camera lens, blocking them from saturating the Camera Setting Camera Setting monitor screen. Unlike other cameras, Samsung Techwin’s Sequence Setting Sequence Setting unique W-V DSP chip gives you a clear image of • Level : the subject even with bright backlight.
  • Page 24 functional description BLC Setting ► ► Main Menu/Camera Setting/Back Light/BLC Main Menu/Camera Setting/AGC You can selectively choose a screen area to see AGC (Automatic Gain Control) adjusts the camera’s Main Menu Main Menu objects within the area more clearly than others. gain control and the screen brightness if the camera Camera Setting Camera Setting...
  • Page 25 SSNR (Samsung Super Noise Reduction) SSDR(Samsung Super Dynamic Range) ► ► Main Menu/Camera Setting/SSNR Main Menu/Camera Setting/SSDR SSNR signifi cantly reduces the amount of low SSDR illuminates darker spots of an image while Main Menu Main Menu luminance noise.
  • Page 26 functional description Day/Night Others ► ► Main Menu/Camera Setting/Day/Night Main Menu/Camera Setting/Others • The Day & Night function allows the camera to switch Sync : Main Menu Main Menu between the Color and B/W modes. INTERNAL : Synchronizes the camera’s output Camera Setting Camera Setting •...

  • Page 27: Sequence Setting

    functional description SEQUENCE SETTING Preset Edit ► Main Menu/Sequence Setting/Preset/Edit You can edit the 13 preset items such as Pan/Tilt Preset Main Menu location, Zoom and Focus, which are selected Camera Setting among camera functions. Preset Location Saving Sequence Setting •...
  • Page 28 functional description Preset Name Setting Preset Execution/Deletion/Memory Check ► ► Main Menu/OSD Setting/Preset Name/Edit Main Menu/Sequence Setting/Preset • Using this function, you can add names to preset Home Position : Main Menu Main Menu locations. Sets one of the currently confi gured preset Camera Setting Camera Setting up to 12 characters.
  • Page 29 functional description Swing SEQ Group SEQ ► ► Main Menu/Sequence Setting/Swing SEQ Main Menu/Sequence Setting/Group SEQ The Swing function commands the camera to move Selecting Group SEQ recalls a group of multiple Main Menu Main Menu between 2 selected locations, monitoring the route. preset locations in a consecutive manner.
  • Page 30 functional description Tour SEQ PTZ Trace ► ► Main Menu/Sequence Setting/Tour SEQ Main Menu/Sequence Setting/PTZ Trace Selecting Tour SEQ recalls groups of preset locations Maximum 4 patterns of the manual operation paths Main Menu Main Menu in a consecutive manner. Up to 6 groups can be (for Pan, Tilt, Zoom and Focus) are memorized and Camera Setting Camera Setting...
  • Page 31 functional description Auto Run Schedule ► Main Menu/Sequence Setting/Auto Run Schedule enables you to schedule a sequencing action by day and time. If there is no controller operation by the user for a • Select Day : Main Menu Auto Run certain time, the sequence operation designated by At Auto Run, select SCHEDULE to set up each Camera Setting...
  • Page 32 functional description Power On Resume P/T SETTING ► Main Menu/Sequence Setting/Power On Resume • Power On Resume : Pan Limit Main Menu ► This is useful when the power is disconnected and Main Menu/P/T Setting/Pan Limit Camera Setting reconnected due to power failures or other power The moving ranges in the Pan directions can be Sequence Setting Main Menu...
  • Page 33 functional description Tilt Limit Area Setting ► ► Main Menu/P/T Setting/Tilt Limit Main Menu/P/T Setting/Area Setting These settings limit the movement range of the Tilt operation. The Area Setting menu enables selecting certain Main Menu locations in the course of the Pan and Tilt operation, •...
  • Page 34 functional description Area Masking Prop. P/T ► ► Main Menu/P/T Setting/Area Masking Main Menu/P/T Setting/Prop.P/T If a monitoring location includes a highly private area, This commands the camera to change the Pan and Main Menu Main Menu the area can be selectively excluded from monitoring. Tilt speed automatically according to the current Camera Setting Camera Setting...
  • Page 35 functional description Digital Flip Image Hold ► ► Main Menu/P/T Setting/Digital Flip Main Menu/P/T Setting/Image Hold Digital Flip is useful to monitor a moving object or a When the camera is moving between presets Main Menu Main Menu person passing directly under the camera. locations, this function freezes the cameras image Camera Setting Camera Setting...
  • Page 36 functional description Jog Speed Max Speed Level ► ► Main Menu/P/T Setting/Jog Speed Main Menu/P/T Setting/Max Speed Level If the speed of your controller or DVR’s Pant/Tilt Adjusts the maximum speed of Pan and Tilt while Main Menu Main Menu command protocol is fi...

  • Page 37: Osd Setting

    functional description OSD SETTING OSD Setting(Others) ► Main Menu/OSD Setting/Others OSD Setting OSD Setting is to set up the OSD (On Screen Display) functions. ► • Main Menu/OSD Setting Direction : • Camera ID : Indicates the current angle of the camera: Main Menu Main Menu East, West, South, North, Southeast, Southwest,...

  • Page 38: Alarm Setting

    functional description ALARM SETTING  As shown in the picture above, the Alarm Input must be entered with the Open or Closed switch signals. Supplying power without entering the signals may damage the product. Alarm Setting • P (Priority) : Setting Up Alarm Input Main Menu ►...
  • Page 39 functional description Alarm Output AUX Output menu is to operate the camera’s peripheral devices such as lamps ► and sirens through the controller and switches as well as through network Main Menu/Alarm Setting/Alarm Output communications. • Setting 1,2 : • OUT Off 1,2 : Enables selecting an Alarm Output method.

  • Page 40: Password Setting

    functional description INITIALIZE PASSWORD SETTING Initialization Menu Password Setting ► ► Main Menu/Initialize Main Menu/Password Setting • The Password feature enables you to confi gure a Power On Reset : Main Menu Main Menu password for rebooting the camera and accessing Restarts the camera.
  • Page 41 Adjust the menu for the iris of the lens. COAX VERSION = V1.00 • CONTROLLER : CON PROTOCOL = SAMSUNG TW Check if the dome cover or the camera lens is dirty or Indicates the settings of the current DOME ID = 001 smudged.
  • Page 42 troubleshooting Problem Cause and Solution PAGE Problem Cause and Solution PAGE Check if the video cable is properly connected. The camera's position differs This phenomenon may happen, since the motors have from the position defi ned in a a margin error of ±0.1˚. Make sure that the power cable and video cable preset.

  • Page 43: Product Specifications

    PRODUCT SPECIFICATIONS SCP-2120 SCP-2120 Imaging Device 1/4 inch, Super HAD color CCD Camera ID TV Standard NTSC/PAL Day & Night AUTO / COLOR / BW Total Pixels NTSC : 811(H) × 508(V) / PAL: 795(H) × 596(V)

  • Page 44: Declaration Of Conformity

    DECLARATION OF CONFORMITY DIMENSIONS Application of Council Directive(s) 2004/108/EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment Speed Dome Camera Model Name SCP-2120 Beginning Serial NO.
  • Page 45 SAMSUNG TECHWIN EUROPE LTD. • • 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungtechwin.com...

Table of Contents