Samsung SCP-3120V User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SCP-3120V
  6. User manual
Samsung SCP-3120V User Manual

Samsung SCP-3120V User Manual

12x speed dome camera
Hide thumbs Also See for SCP-3120V:
Table of Contents

Advertisement

Quick Links

Download this manual
12X SPEED DOME CAMERA
User Manual
SCP-3120/3120V/3120VH

Advertisement

Table of Contents
loading

Related Manuals for Samsung SCP-3120V

Summary of Contents for Samsung SCP-3120V

  • Page 1 12X SPEED DOME CAMERA User Manual SCP-3120/3120V/3120VH...

  • Page 2: Safety Information

    Do not connect multiple cameras to a single adapter. Exceeding the capacity may Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this cause abnormal heat generation or fi re. document, but no formal guarantee shall be provided. Use of this document and the subsequent Securely plug the power cord into the power receptacle.
  • Page 3 This device must accept any interference received including interference that may If this product fails to operate normally, contact the nearest service center. Never cause undesired operation. disassemble or modify this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or attempted repair.) CAUTION When cleaning, do not spray water directly onto parts of the product.

  • Page 4: Table Of Contents

    Use only with the cart, stand, tripod, bracket, or table specifi ed SCP-3120V (Ceiling Mount) by the manufacturer, or sold with the apparatus. When a cart is SCP-3120V (mount onto the used, use caution when moving the cart/apparatus combination optimal adaptor) to avoid injury from tip-over.

  • Page 5: Troubleshooting

    • Versatile protocols and coaxial communication Initialize RS-485, Coaxial communication methods are supported. Password setting RS-485 (10 protocols) : Samsung-T, Pelco (D / P), Samsung-E, Panasonic, Honeywell, Status AD, Vicon, GE, BOCSH Coaxial Communications: Pelco Coaxitron (automatic detection) • Wide Range Auto Security Functions...

  • Page 6: Components And

    introduction • OSD (On Screen Display) COMPONENTS AND ACCESSORIES The camera IDs, camera preset numbers, preset names, area names, and camera operation status are displayed on the monitor, allowing set up of various camera ❖ SCP-3120 functions through the OSD menu screen. •...
  • Page 7 Accessories The following items are sold separately from the camera. ❖ SCP-3120V 12X SPEED DOME CAMERA User Manual SCP-3120/3120V/3120VH SBP-302F Hanging Mount SBP-302P Ceiling Mount SBP-302W Wall Mount Body User Guide 7Pin Terminal Block SBP-302L Parapet Mount SCX-300KM Corner Mount...

  • Page 8: Component Names And Functions

    COMPONENT NAMES AND FUNCTIONS SCP-3120 SCP-3120V ❖ ❖ ❖ ❖ Front Side Front Side ❖ ❖ Bottom Bottom Communication Setup Screw Hole Switch Communication Setup ID Setup Switch Switch Video/Communication/ ID Setup Switch Power Video/Communication/ Alarm Power Alarm ...
  • Page 9 introduction COMPONENT NAMES AND FUNCTIONS Camera Wiring Interface Board For the camera wiring, please refer to the picture below. The camera's wiring interface SCP-3120VH board is fi tted to the housing, this is sold separately. (When using coaxial communication, a separate control signal connection is not required.) ❖...

  • Page 10: Communication Protocol

    introduction installing your camera Camera Wiring Interface Board HOW TO SET UP PROTOCOLS AND ID DIP SWITCHES You can control various settings of the camera system using the Communication and ID Control Signal Connection DIP switches. Before installing the product, please set up the DIP switches according to the installation environment.

  • Page 11: Settings (Sw1

     Note that LCD monitor does not switch to OSD mode and the Joystick will not provide Reserved Enter operation, when using the OSD menu with Samsung-E protocol. ❖ Baud Rate Settings Select the transfer speed of a selected communication protocol.

  • Page 12: Installing Your Camera

    installing your camera ❖ Camera ID Chart SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 ON/OFF 22_ installing your camera English _ 23 English...
  • Page 13 installing your camera SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 24_ installing your camera English _ 25 English...
  • Page 14 installing your camera SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 SW1-#1 SW1-#2 SW1-#3 SW1-#4 SW1-#5 SW1-#6 SW1-#7 SW1-#8 26_ installing your camera English _ 27 English...

  • Page 15: Preparing Adapter And

    For the installation guidelines for the brackets and housings, refer to the user’s manual Power Adapter enclosed with the bracket or housing that is sold separately. Power adapter has the capacity AC24V 1.0A(SCP-3120)/2.5A(SCP-3120V/VH). · Camera Wiring Diagram RS-485 Video Cable...

  • Page 16: Installation Examples

    installing your camera INSTALLATION EXAMPLES ON-CEILING MOUNT TYPE INSTALLATION EXAMPLE The pictures below show the front view of the camera installed with a wall or fl ush Attach Template bracket. For more instructions on installing the camera, please refer to the following Attach the template on the ceiling, facing the “Front”...
  • Page 17 installing your camera Assemble Camera & Bracket Connect Cables Connect each camera cable to the proper terminals on the bottom of the camera. For Cameras on the sides 'Align The Arrow' triangle corner mount bracket and the arrow more detailed instructions, please refer to Page 17:“Camera Wiring Interface Board”. shows a match to match.
  • Page 18 installing your camera FLUSH MOUNT TYPE INSTALLATION EXAMPLE Detach the Mount Housing Remove the 3 screws, and then detach the mount housing from the camera. Drill Hole on the Ceiling Attach the template, and then drill a hole according to the 120 mm diameter hole marked on the template.

  • Page 19: Scp-3120V (Ceiling Mount

    Install Camera SCP-3120V (CEILING MOUNT) Install Camera Fit the camera to the hole on the ceiling, and then secure the camera Use the provided L-shaped wrench to remove the surface mount by loosening 4 using 3 Product-enclosed Fixture Screws (M4x20).

  • Page 20: Scp-3120V (Mount Onto The

    Connect the safety wire (attached to the camera) to the surface mount as shown. Then, SCP-3120V (MOUNT ONTO THE OPTIMAL ADAPTOR) arrange the cables. (For more information about the wiring, refer to "Camera Wiring Follow step 1 in "Ceiling Mount" above and remove the surface mount.

  • Page 21: Scp-3120Vh

    installing your camera SCP-3120VH Secure the safety wire (attached to the product) to the housing as shown. (For details about the cable connection, refer to the "Camera Wiring Interface Board" section in this Use the provided L-shaped wrench to loosen 4 screws counter clockwise, which will manual.) help removing the housing.

  • Page 22: Osd Commands, Function

    interface symbols • • Motion Detection Standby/Operation Display : OSD Menu Screen : When in standby mode, the " " in the upper right of the screen blinks and then Camera Setting changes to " " if motion is detected. •...

  • Page 23: Operating Your Camera

    operating your camera OSD MENU CHART Preset Setting/Edit/Home Position/Execute/Clear/Status Focus Mode AUTO/MANUAL/ONESHOT Pan Swing Setting/Execute/Clear Zoom/Focus Digital Zoom OFF/2X/3X/4X/5X/…/16X Swing SEQ. Tilt Swing Setting/Execute/Clear ATW(IN)/ATW(OUT) P&T Swing Setting/Execute/Clear Group SEQ. Group1~6 Setting/Execute/Clear White Balance 0~255 Tour SEQ. Setting/Execute/Clear Manual Blue 0~255 PTZ Trace Trace1~4...

  • Page 24: Functional Description

    operating your camera functional description CAMERA SETTING Image Hold ON/OFF Jog Speed Manual/10/20/30/40/50/60 Zoom/Focus Settings Max Speed Level 1/2/3/4/5/6/7 Camera ID ON/OFF Focus Mode and Digital Zoom Setting Menu ON/OFF Camera Name ► Main Menu/Camera Setting/Zoom/Focus Edit Camera Name • Focus Mode : Preset Number ON/OFF...
  • Page 25 functional description White Balance Exposure ► ► Main Menu/Camera Setting/White Balance Main Menu/Camera Setting/Exposure The White Balance menu adjusts the balance of the The Exposure settings are to control the camera’s Main Menu Main Menu screen colors under different lighting conditions. exposure meter.
  • Page 26 Main Menu/Camera Setting/Back Light the same time, this mode makes both areas Camera Setting Camera Setting distinctive. Unlike other cameras, Samsung Techwin’s Sequence Setting Sequence Setting unique A1 DSP chip gives you a clear image of the subject even with bright backlight.
  • Page 27 functional description BLC Setting ► ► Main Menu/Camera Setting/Back Light/BLC Main Menu/Camera Setting/AGC You can selectively choose a screen area to see AGC (Automatic Gain Control) adjusts the camera’s Main Menu Main Menu objects within the area more clearly than others. gain control and the screen brightness if the camera Camera Setting Camera Setting...
  • Page 28 functional description DNR (Dynamic Noise Reduction) XDR(eXtended Dynamic Range) ► ► Main Menu/Camera Setting/DNR Main Menu/Camera Setting/XDR DNR signifi cantly reduces the amount of low XDR illuminates darker spots of an image while Main Menu Main Menu luminance noise. retaining the same light level for brighter spots to Camera Setting Camera Setting even out the overall brightness of the image with high...
  • Page 29 functional description Day/Night Others ► ► Main Menu/Camera Setting/Day/Night Main Menu/Camera Setting/Others • The Day & Night function allows the camera to switch Sync : Main Menu Main Menu between the Color and B/W modes. INTERNAL : Synchronizes the camera’s output Camera Setting Camera Setting •...

  • Page 30: Sequence Setting

    functional description SEQUENCE SETTING Preset Edit ► Main Menu/Sequence Setting/Preset/Edit You can edit the 13 preset items such as Pan/Tilt Preset Main Menu location, Zoom and Focus, which are selected Camera Setting among camera functions. Preset Location Saving Sequence Setting •...
  • Page 31 functional description Motion Detection Preset Name Setting ► ► Main Menu/Sequence Setting/Preset/Edit/Motion Det. Main Menu/OSD Setting/Preset Name/Edit Commands the camera to perform Motion Detection Using this function, you can add names to preset Main Menu Main Menu after it arrives at a selected preset location. locations.
  • Page 32 functional description Preset Execution/Deletion/Memory Check Swing SEQ ► ► Main Menu/Sequence Setting/Preset Main Menu/Sequence Setting/Swing SEQ • Home Position : The Swing function commands the camera to move Main Menu Main Menu Sets one of the currently confi gured preset between 2 selected locations, monitoring the route.
  • Page 33 functional description Group SEQ Tour SEQ ► ► Main Menu/Sequence Setting/Group SEQ Main Menu/Sequence Setting/Tour SEQ Selecting Group SEQ recalls a group of multiple Selecting Tour SEQ recalls groups of preset locations Main Menu Main Menu preset locations in a consecutive manner. A group in a consecutive manner.
  • Page 34 functional description PTZ Trace Auto Run ► ► Main Menu/Sequence Setting/PTZ Trace Main Menu/Sequence Setting/Auto Run Maximum 4 patterns of the manual operation paths If there is no controller operation by the user for a Main Menu Main Menu (for Pan, Tilt, Zoom and Focus) are memorized and certain time, the sequence operation designated by Camera Setting Camera Setting...
  • Page 35 functional description Schedule Power On Resume ► Main Menu/Sequence Setting/Power On Resume Schedule enables you to schedule a sequencing action by day and time. • • Power On Resume : Select Day : Auto Run Main Menu This is useful when the power is disconnected and At Auto Run, select SCHEDULE to set up each Mode SCHEDULE...
  • Page 36 functional description P/T SETTING Tilt Limit ► Main Menu/P/T Setting/Tilt Limit Pan Limit These settings limit the movement range of the Tilt operation. ► • Main Menu/P/T Setting/Pan Limit Position : The moving ranges in the Pan directions can be Selecting the Position menu brings up the Main Menu Main Menu...
  • Page 37 functional description Area Setting Area Masking ► ► Main Menu/P/T Setting/Area Setting Main Menu/P/T Setting/Area Masking The Area Setting menu enables selecting certain If a monitoring location includes a highly private area, Main Menu Main Menu locations in the course of the Pan and Tilt operation, the area can be selectively excluded from monitoring.
  • Page 38 functional description Prop. P/T Digital Flip ► ► Main Menu/P/T Setting/Prop.P/T Main Menu/P/T Setting/Digital Flip This commands the camera to change the Pan and Digital Flip is useful to monitor a moving object or a Main Menu Main Menu Tilt speed automatically according to the current person passing directly under the camera.
  • Page 39 functional description Image Hold Jog Speed ► ► Main Menu/P/T Setting/Image Hold Main Menu/P/T Setting/Jog Speed When the camera is moving between presets If the speed of your controller or DVR’s Pant/Tilt Main Menu Main Menu locations, this function freezes the cameras image command protocol is fi...

  • Page 40: Osd Setting

    functional description Max Speed Level OSD SETTING ► Main Menu/P/T Setting/Max Speed Level Adjusts the maximum speed of Pan and Tilt while OSD Setting Main Menu performing the Preset and Sequencing actions. ► Main Menu/OSD Setting Camera Setting 1~7: Pan and Tilt operations can be set up to •...

  • Page 41: Alarm Setting

    functional description OSD Setting(Others) ALARM SETTING ► Main Menu/OSD Setting/Others OSD Setting is to set up the OSD (On Screen Display) functions. Alarm Setting • Direction : Setting Up Alarm Input Indicates the current angle of the camera: Main Menu Main Menu ►...
  • Page 42 functional description Alarm Output  As shown in the picture above, the Alarm Input must be entered with the Open or ► Main Menu/Alarm Setting/Alarm Output Closed switch signals. Supplying power without entering the signals may damage the • product. Setting 1,2 : 1, 2, Motion, and Support Device indicate Main Menu...
  • Page 43 functional description AUX Output menu is to operate the camera’s peripheral devices such as lamps INITIALIZE and sirens through the controller and switches as well as through network communications. Initialization Menu • OUT Off 1,2 : ► Main Menu/Initialize When an alarm event occurs, the output force can be terminated. •...

  • Page 44: Password Setting

    functional description PASSWORD SETTING STATUS Password Setting Status ► ► Main Menu/Password Setting Main Menu/Status The Password feature enables you to confi gure a Displays the settings and version of the dome Main Menu Main Menu password for rebooting the camera and accessing camera.
  • Page 45 troubleshooting TROUBLESHOOTING Problem Cause and Solution PAGE Problem Cause and Solution PAGE Check if the camera and peripheral devices are Check if the video cable is properly connected. properly connected. Controller does not work. Make sure that the power cable and video cable Verify the setups of ID, protocol, and baud rates.

  • Page 46: Product Specifications

    PRODUCT SPECIFICATIONS Problem Cause and Solution PAGE SCP-3120 SCP-3120V SCP-3120VH The camera's position differs This phenomenon may happen, since the motors have from the position defi ned in a Imaging Device SONY 1/4inch, ExView-HAD PS CCD(ICX-448/449) a margin error of ±0.1˚.
  • Page 47 ATW(IN) / ATW(OUT) / AWC / MANUAL (Unit : mm) Electronic Shutter NTSC:1/60~10,000sec, PAL:1/50~10,000sec Serial Communication RS485, Coaxial Communication SAMSUNG-T, SAMSUNG-E, Pelco-D, Pelco-P, Pelco Coaxitron, Protocol Panasonic, Honeywell, AD, Vicon, BOSCH, GE Alarm 2 In, 2 Out Digital Flip ON/OFF Waterproof Standards ·...
  • Page 48 SCP-3120V SCP-3120VH 3/4 Inch Threaded Pitch 1.8143 Thread angle : 55 Basic Hole : Ø 24.117 NP 1.5Inch Threaded Ø165 Ø200 94_ dimensions English _ 95 English...

  • Page 49: Declaration Of Conformity

    DECLARATION OF CONFORMITY Application of Council Directive(s) 2004/108/EC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-716 European Representative Name European Representative Address Equipment Type/Environment Speed Dome Camera Model Name SCP-3120/3120V/3120VH Beginning Serial NO.
  • Page 50 memo 98_ memo English _ 99 English...
  • Page 51 SAMSUNG TECHWIN EUROPE LTD. • • 1480 Charles Willard St, Carson, CA 90746, UNITED STATES Samsung House, 1000 Hillswood Drive, Hillswood Business Tol Free : +1-877-213-1222 FAX : +1-310-632-2195 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS www.samsungcctvusa.com TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungtechwin.com...

This manual is also suitable for:

Scp-3120Scp-3120vh

Table of Contents