Setting The Alarm To A Buzzer; To Set The Alarm To A Buzzer; Figure 4. Locations Of Parts Needed To Set Alarm To Buzzer - Timex AM/FM Radio Alarm Clock User Manual

Setting the Alarm to a Buzzer

The Timex AM/FM radio alarm clock can be used as an alarm. This section will
explain how to set the alarm to a buzzer. Figure 4 shows the locations of the parts
needed to set this feature.
Hour Button
Alarm Button

Figure 4. Locations of Parts Needed to Set Alarm to Buzzer

To Set the Alarm to a Buzzer:

NOTE: Make sure you have set the clock before using the alarm.
1. Plug the power cord into an electrical outlet.
2. Hold down the alarm button; then press the hour button repeatedly until you reach
the hour you want the alarm to go off.
3. Continue holding down the alarm button; then press the minute button repeatedly
until you reach the minute you want the alarm to go off.
4. Move the radio/alarm switch to the buzz setting. A red light that says alarm will
display in the lower left hand corner of the digital display.
Minute Button
Radio/Alarm Switch
8
Power Cord