Nokia ?110 User Manual page 45

It is true that there might be a pause while the driver initialises the wireless
LAN card. This is normal. Please wait until the next message box appears
and tells you what to do. This should not take more than a few minutes.
You cannot install the Nokia C110/C111 Wireless LAN Card software onto
a network drive. The software must always be installed on a local hard drive.
If there is no network client installed on your computer, Windows
automatically starts installing it when you insert the wireless LAN card.
When the network client installation is finished, Windows asks you to restart
the computer (YES/NO). You must select NO and continue with the wireless
LAN card installation. Restart the computer after the card installation is
complete.
You must have NT Networking installed on your computer. If you do not
have NT Networking installed, a dialog box opens asking if you want to
install it now. Click Yes and follow the instructions given in the wizard. Note
that you need the Windows NT installation files during this procedure. The
order in which the various installation files are used is: first the Nokia C110/
C111 installation files, then the Windows NT installation files, and finally
the Nokia C110/C111 files again.
Go to Start, click Run, and type regedit. Click OK. The following registry
entries should be deleted in the Registry Editor window:
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersi
on\Uninstall\{BFA1B53A-C809-11D3-AABD-0008C79B73DF}
• HKEY_LOCAL_MACHINE\Software\Nokia\C11x WLAN
Card\Installation
After deleting these, install the software again. It is recommended that you let
your system administrator remove the registry entries.
You must have local administrator rights when installing or uninstalling in
Windows NT 4.0 or Windows 2000.
45