Nokia ?110 User Manual page 31

You can enter and edit the personal WEP key in text format, too.
Click As Text, and type in the text. Click OK and the system converts
the text into hexadecimal format. You can copy and paste the text by
using the CTRL+ C and CTRL+V key combinations respectively.
Note that on the Personal Key tab you cannot select a personal WEP key to be
used. To select a personal key to be used with a certain profile:
Go to the Profiles page, select the profile you want to modify , click Edit,
1
and select the Security tab.
Select Use WEP security , then select Use a personal WEP key . Click Select.
2
A list of personal WEP keys is displayed. Select a personal key from the list
3
and click OK.
Click OK to close the Edit Profile dialog box.
4
When you create profiles, you are asked to specify whether you want the
DHCP server to allocate an IP address for the wireless LAN card, and
whether you want your computer to log on to a domain. By default, these
settings are managed automatically as defined in each profile.
When the Manage TCP/IP properties together with profiles check box is
cleared, profiles will be activated without TCP/IP settings. You can change
the settings manually in the Control Panel.
Profiles will be activated without domain settings if the Manage domain
settings together with profiles check box is cleared. You can change the
settings manually in the Control Panel.
Both of these check boxes must be selected if you want the profiles
to be able to log you on to a domain or allocate IP addresses.
By default, the network name is case-sensitive. To change this property, clear
the Case-sensitive network names check box.
If you want the system to allocate you IP addresses automatically, select the
Renew DHCP automatically when needed check box. You can also renew
your IP address whenever you want by clicking the Renew DHCP Now
button.
For the changes to take effect, click the Apply button. If you have made
changes to the settings but wish to restore the previous settings, click
Restore.
On the Diagnostics page, you can run a series of fault diagnosis tests to
ensure that the Nokia C110/C111 Wireless LAN Card and the software are
31