Identification; Vehicle Identification Number; Model Label - Yamaha YZF-R125 Service Manual
Hide thumbs
Also See for YZF-R125:
- Owner's manual (98 pages) ,
- Owner's manual (96 pages) ,
- Owner's manual (84 pages)
Table of Contents
Advertisement
IDENTIFICATION
YamahaR125.COM
EAS20130
IDENTIFICATION
EAS20140
VEHICLE IDENTIFICATION NUMBER
The vehicle identification number "1" is stamped
into the right side of the steering head pipe.
1
EAS20150
MODEL LABEL
The model label "1" is affixed to the frame. This
information will be needed to order spare parts.
1
1-1
- Quick Links:
- Engine Tightening Torques
- Wiring Diagram
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
Need help?
Do you have a question about the YZF-R125 and is the answer not in the manual?
Questions and answers
Hello! I **** having 2 wires that does not connect with anything and can't connect ti each other. My motorcycle won't rev past 7000rpm so i thaught this might be the cause. Can you help me to figure out what can indo with those wires?
Check the leads, couplers, and connectors for stains, rust, or moisture. Disconnect the wires and inspect the terminals. If there is no continuity, clean the terminals. If moisture is present, dry them with an air blower. If rust or stains are found, connect and disconnect the wires several times to improve contact. Ensure all connections are secure and properly connected. If the issue persists, use a contact revitalizer.
This answer is automatically generated
Hi, dont know hov to Connect the small houe on the waterpump, is it the one that Connect to airbox??,
The small hose on the water pump of a Yamaha YZF-R125 is referred to as the water pump breather hose. The document does not provide specific instructions for connecting it. However, it is generally routed according to the cable routing diagram and should be securely attached to the designated fitting on the water pump, ensuring there are no kinks or obstructions.
This answer is automatically generated
Is the coolant reservoirhose conekted to the inlett on the right side on the waterpump?,