Power-Off Sequence; Connecting The Scanner To Your Computer Using; The Usb Interface - Epson EXPRESSION 1640XL User Manual

Power-off sequence

Keep the following in mind every time you turn off your
computer and SCSI devices.
When you are finished using your system, turn off your
computer first, then the scanner and other SCSI devices in
reverse order of the power-on sequence.
While using your computer, do not turn off any SCSI device
which has a terminator that is active (on).
Do not turn the scanner off and back on while using your
computer, otherwise the scanner may not work properly.
When the connection is complete, you need to install the scanner
software. See Chapter 3, "Installing the Software," for
instructions.
Connecting the Scanner to Your Computer
using the USB Interface
Your PC must have been purchased with Windows 2000 or
Windows 98 preinstalled, and have a working USB port.
Your Macintosh computer must be running system 8.5 or later
and have a built-in USB port.
Note for Macintosh Users:
Be sure to install the scanner software before connecting the scanner to
your Macintosh. See Chapter 3, "Installing the Scanner Software for
Macintosh," for details.
Setting Up the Scanner
2
2-13