Power-On Sequence; Power-Off Sequence - Epson GT-30000 Quick Start Manual

Color image scanner

Hide thumbs Also See for GT-30000:

Table of Contents

4. Plug in the power cords of your PC, the scanner, and other external SCSI devices.

Note:

Before turning on your system, be sure to read "Power-on sequence" following.

Power-on sequence

Keep the following in mind every time you turn on your PC and SCSI devices, including

the scanner.

Be sure to turn on the SCSI devices first and your PC last. If you turn on a SCSI

device after your PC, the SCSI device or your PC may not work properly.

For Windows 95, 98, 2000, or Millennium Edition users:

The first time you turn on your PC after the scanner, one of the following dialog

boxes or similar may appear.

Windows 98

If you see one of these, follow the installation instructions as described in "Installing

EPSON TWAIN HS" on page 16, then see "Power-off sequence" following.

Keep the following in mind every time you turn off your PC and SCSI devices.

When you are finished using your system, turn off your PC first, then the scanner

and other SCSI devices.

While using your PC, do not turn off any SCSI device which has a terminator that

is active (on).

Windows 95

Windows 2000

Windows Millennium Edition

Table of Contents