Yamaha FJR1300AS 2011 Owner's Manual page 26

INSTRUMENT AND CONTROL FUNCTIONS
Ambient temperature mode
3
1. Ambient temperature
This display shows the ambient tem-
perature from –9 °C to 50 °C in 1 °C in-
crements. The temperature displayed
may vary from the ambient tempera-
ture.
TIP
G
If the ambient temperature falls be-
low –9 °C, a lower temperature
than –9 °C will not be displayed.
G
If the ambient temperature climbs
above 50 °C, a higher temperature
than 50 °C will not be displayed.
G
The accuracy of the temperature
reading may be affected when
riding slowly (approximately under
20 km/h) or when stopped at traffic
signals, railroad crossings, etc.
Instantaneous fuel consumption mode
1. Instantaneous fuel consumption
The instantaneous fuel consumption
display can be set to either "km/L" or
"L/100 km".
G When the display is set to "km/L",
the distance that can be traveled
on 1.0 L of fuel under the current
riding conditions is shown.
G
When the display is set to "L/100
km", the amount of fuel necessary
to travel 100 km under the current
riding conditions is shown.
3-11
TIP
G
To switch between the two instan-
taneous fuel consumption dis-
plays, push the reset button for 1
second when either display is
shown.
G
If traveling at speeds under 10
km/h, "_ _._" will be displayed.
Average fuel consumption mode
1. Average fuel consumption
This display shows the average fuel
consumption since it was last reset.
The average fuel consumption display
can be set to either "AV_ _._ km/L" or
"AV_ _._ L/100 km".