Yamaha FJR1300AS 2011 Owner's Manual page 20

INSTRUMENT AND CONTROL FUNCTIONS
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
3
on.
Oil level warning light "
This warning light comes on if the en-
gine oil level is low.
The electrical circuit of the warning light
can be checked by turning the key to
"ON". The warning light should come
on for a few seconds, and then go off.
If the warning light does not come on
initially when the key is turned to "ON",
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
EAU11060
" TIP
Even if the oil level is sufficient, the
warning light may flicker when riding on
a slope or during sudden acceleration
EAU11080 or deceleration, but this is not a mal-
"
function.
Engine trouble "
"SHIFT" indicators and warning
EAU11123
light
"
Engine trouble indicator "
warning light
1. Engine trouble indicator "
light
This indicator is displayed and the
warning light comes on or flashes if a
problem is detected in the electrical cir-
cuit monitoring the engine. If this oc-
curs, have a Yamaha dealer check the
self-diagnosis system. (See page 3-13
for an explanation of the self-diagnosis
device.)
YCC-S indicator "SHIFT" and warning
light
EAU40518
"/YCC-S
" and
1. YCC-S indicator "SHIFT" and warning light
This indicator is displayed and the
warning light comes on if there is a mal-
function in the YCC-S. If this occurs:
G
" and warning
G
3-5
The YCC-S is disabled, so it will be
impossible to shift out of the gear
you are in.
The clutch may stay engaged, so a
shuddering sensation may be felt
as you come to a stop.