Table of Contents
Advertisement
Security System Operation (cont'd)
How to Remove Bypassed Zones
A bypassed zone will automatically be unbypassed when you disarm the system. If the
system is disarmed and a zone is bypassed, you can remove the bypass as follows:
1. View bypassed zones by pressing the
SHOW ZONES button. The "Zones" screen is
displayed.
NOTE: While iCenter is requesting and
receiving the zone data from the control panel,
the "Zones" screen displays "Getting Zone
Status...".
2. Remove zone bypasses by pressing the
CLEAR BYPASSES button. The "User
Authorization" screen is displayed with the
instructions To Clear Bypasses, Enter Code.
NOTE: A zone cannot be unbypassed while
the system is armed.
3. Enter your 4-digit user code. The "More
Choices" screen is displayed showing the
system as Ready to Arm.
NOTE: This will not occur if any zone(s) is
open (not ready).
22
ACTION
SCREEN
Advertisement
Table of Contents
Need help?
Do you have a question about the iCenter 8142ADT and is the answer not in the manual?
Questions and answers