Information; Resetting Products To Factory Settings - Jura IMPRESSA S9 avantgarde Instructions For Use Manual

Turn the Rotary Switch (4) to change the time format.
DISPLAY
AM / PM / ML
Confirm your selection by pressing the Rotary Switch (4).
DISPLAY
AM / PM / ML
Turn the Rotary Switch (4) to change the unit of measurement.
DISPLAY
AM / PM / OZ
Confirm your selection by pressing the Rotary Switch (4).
DISPLAY
AM / PM / OZ
Turn the Rotary Switch (4) until the following message is dis-
played:
EXIT
Now press the Rotary Switch (4) to leave the programming
mode.
SELECT PRODUCT

12.15 Information

This program item enables you to check the number of
products you made and how often you selected a specific
function.
SELECT PRODUCT
Open the programming door (3). Press the Rotary Switch (4)
until you hear an acoustic signal.
FILTER
NO or YES
Turn the Rotary Switch (4) until the following message is dis-
played:
INFO
20
Now press the Rotary Switch (4) to access the Information
menu.
TOTAL
1000 (example)
Turn the Rotary Switch (4) to display how often you made 2
espressos, 1 coffee, 2 coffees, coffee à la carte, powder, water
and steam.
Finally, the number of cleaning and decalcifying cycles and filter
changes are displayed.
To exit the information program, press the Rotary Switch (4).
INFO
Now turn the Rotary Switch (4) until the following message is
displayed:
EXIT
Now press the Rotary Switch (4) to leave the programming
mode.
SELECT PRODUCT

12.16 Resetting products to factory settings

Possibilities are provided to enable you to reset Espresso and
coffee products to the factory settings.
With draw-off buttons 1 Espresso and 1 Coffee, the following
parameters can be reset: coffee strength, amount of water, tem-
perature.
With draw-off buttons 2 Espressi and 2 Coffees, the following
parameters can be reset: amount of water, temperature.
To reset the buttons, with your IMPRESSA in Standby mode and
with the power switched ON, press the rotary switch and the
draw-off button that you wish to reset simultaneously and hold
them down until the display shows
1 ESPRESSO (example)
OK