Do you have a question about the NEO-22 and is the answer not in the manual?
Questions and answers
George
February 2, 2025
when i put a cdg on my machine, it doesn't say what songs are on it to rip. Why
1 comments:
Mr. Anderson
February 10, 2025
The RSQ NEO-22 does not display song titles when a CDG is inserted because ripped tracks do not contain any artist or song title information. Instead, the system assigns a generic track format like "TRK[Disc ID][Track #]" (e.g., TRKEB001). The device does not capture or store song titles, so unless the user manually renames the files, only track numbers are shown.
Safety Warnings CLASS 1 LASER PRODUCT CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT This player is classified as a CLASS 1 LASER product. LUOKAN 1 LASER LAITE KLASS 1 LASER APRARAT Use of controls, adjustments or performance of PRODUCTO LASER CLASE1 procedures other than those specified herein may result in hazardous radiation exposure.
Precautions Ensure that the AC power supply in your house complies with the identification sticker located on the back of your player. Install your player horizontally, on a suitable base(furniture), with enough space around it for ventilation(7.5~10cm). Make sure the ventilation slots are not covered. Do not stack anything on top of the player. Do not place the player on amplifiers or other equipment which may become hot.
Before Use Playable Media DVD, SVCD, VCD, HDCD, Audio CD, DVD+/-R, DVD+/-RW, SVCD and CD-R/RW that contains Audio titles, NEO+G, MP3+G, CD+G, MP3, WMA, JPEG, MPEG4 or DivX files. Regional code This unit plays the DVD discs labeled “All” Remote Control Operation Range Point the remote control at the remote sensor and press the buttons Distance: about 23ft(7m) from the front of the remote sensor Angle: About 30°...
Description Remote Control BASIC KARAOKE POWER OPEN/CLOSE VOL -/+ -Music Volume -/+ Control Key b/# Control -Key b/# Control ECHO -/+ -Echo -/+ Control USB/DVD -Drive Change between Disc, USB and SD MPX(Multiplex)=L/R/ST -Vocal ON/OFF/Auto for DAT and Vocal Song with 2CH AUDIO -Vocal ON/OFF/Auto for VOB file with 2 audio -EQ Control...
Connections Connecting to the Power Supply Plug the main lead (marked AC Cord on the rear of the player) into an appropriate socket Press the Power button to switch your Player on. The present product can be used under the AC 100~240V~. 50/60Hz <NOTE>...
Connections Connection to 5.1CH amplifier 5.1CH Analog Audio Output Please connect the RCA CABLES from 5.1CH ANALOG AUDIO OUT terminals on the rear of the player to the 5.1CH ANALOG AUDIO IN terminals of the 5.1CH Analog Amplifier. In order to get the 5.1CH analog audio output, the player must be set as follows;...
Connections Connecting with SD Card or USB devices You can play MP3+G, MP4, AVI, DAT, VOB, MP3, WMA and JPEG files from SD/USB. Connect the SD CARD or USB device to each slot on the player. If any Disc is not in the Disc tray, the player will read the SD CARD or USB directly. ...
Basic Operation Basic Operation Press OPEN/CLOSE to open and close the disc tray. OPEN/CLOSE: PLAY/PAUSE: Press PLAY once to play the file/track desired and press PAUSE again to pause the playback. To return to normal playback, press PLAY/PAUSE again. STOP: Press STOP key to end playback.
Page 11
Basic Operation Press RETURN button to return to previous level of the Menu. RETURN: MENU Press MENU key to the disc menu mode on the screen. Press ARROW buttons or NUMERIC buttons (0~9) to select a play option and press ENTER (DVD/MPEG4): button to confirm.
Special Operation Special MPEG4 Operation DivX3.11, 4.x, 5.x, XviD, DivX Pro(Excluding QPEL and GMC) SUPPORTED VIDEO FORMATS: <NOTE> Bit rate may fluctuate; Device may skip encoding the high bit rate portions and begin decoding again when Bit rate returns to normal. Maximum bit rate: 4Mbps.720*480 @30fps, 720*576 @25fps ...
NEO+G Karaoke Operation Insert a Karaoke Disc(NEO+G/MP3+G) into the Tray of the player. PLAYING NEO+G DISC: Select a desired song with “SONG NUMBER INPUT” or with “SONG LIST WINDOW” Press PLAY/PAUSE or ENTER button to start play. ...
Page 14
NEO+G Karaoke Operation You can record your singing sound & graphics with Neo+G & MP3+G songs into USB/SD at RECORDING OF SINGING: MP3+G format. ① Please connect a USB/SD Card and Microphone into the Player in advance and play a (NEO+G, MP3+G) NEO+G or MP3+G song from Disc or USB/SD.
Page 15
NEO+G Karaoke Operation You can rip the CD+G Disc with High speed (4X) into USB/SD at MP3+G format including CD+G Disc Ripping Music and Graphics. ① After connect a USB/SD Card into the Player in advance, insert a CD+G Disc to the player.
System Setup System Setup TV System The TV setup is for switching to different TV system (NTSC, PAL60, PAL and AUTO). *If you don’t know which TV system you have, just select AUTO. Turn the screen saver ON and OFF. SCREEN SAVER: HDTV Output: If the disc is HD, select the corresponding HD resolution(HD OFF/ 720P / 1080i / 1080P).
System Setup Video Setup Set the brightness of the video from range 0-12. BRIGHTNESS: Set the contrast of the video from range 0-12 CONTRAST: HUE: Set the hue of the video. +color to increase red color, -color to increase green color. SATURATION: Set the degree of the saturation of the video.
Trouble Shooting Symptom Remedy No power Insert the AC power plug securely into the power outlet and press “Power” button on the front panel. Play fails to start even when PLAY is pressed. Condensation has formed: wait about 1 to 2 hours to allow the player to dry Play starts but then stops immediately out.
Need help?
Do you have a question about the NEO-22 and is the answer not in the manual?
Questions and answers
when i put a cdg on my machine, it doesn't say what songs are on it to rip. Why
The RSQ NEO-22 does not display song titles when a CDG is inserted because ripped tracks do not contain any artist or song title information. Instead, the system assigns a generic track format like "TRK[Disc ID][Track #]" (e.g., TRKEB001). The device does not capture or store song titles, so unless the user manually renames the files, only track numbers are shown.
This answer is automatically generated